RAM-316-3SW1U RAM Mount Universal RAM Mount Universal Laptop Mount

Description

The RAM-316-3SW1U is the latest in the mobile in-car range from RAM Mount for light to medium weight electronic devices such as laptop mounts. No drilling required!

RAM-316-3SW1U shown above.

RAM-316-3SW1U Features:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.

Base Description: Each aluminum leg has a mounting foot with a mounting hole. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the flexible legs. The third flexible leg on the RAM Pod III should also be adjusted to help support the mount (normally up front under the dash on the passenger side). The rigid flexible arms will hold everything you need safely and securely. The latest in the Mobile In-Car range from RAM.
Leg Description: The length of the RAM-POD III Leg Lengths are:

Length of Leg 1: 18 inches
Length of Leg 2: 20 inches
Length of Leg 3: 30 inches

Swing Arm Description: Includes 6 inch swing arm extension.

Tough Tray Included: The RAM-234-3 "Tough-Tray" will hold laptops with a width from 10 to 16 inches and also works with most 17 inch screen laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.

NOTE: To compare dimensions of the original Tough Tray and Tough Tray II click here.
Tough Tray Dimensions: The device dimensions the RAM-234-3 Tough Tray will accommodate are listed below:
- Tray Depth: 10.0 inches
- Tray Thickness: 2.125 inches
- Tray Width (Expansion): 10 inches to 16 inches NOTE: Works with most 17 inch screens.
- Side Clamp Arm Height: 0.5 inch (min) to 1.75 inches (max)

RAM-316-3SW1U Options (NOT INCLUDED):

Power Caddy: RAM-234-5U attaches to the back of the Tough Tray and holds power supplies and small accessories.
Screen Support: RAM-234-S2U attaches to the side of the Tough Tray and secures the laptop lid in a fixed position.
Secure-N-Motion: RAM-234-SNMU Secure-N-Motion is recommended by RAM Mounts if an electronic device is going to be secured in the the Tough Tray while the vehicle is in motion. .
Additional Accessories: To view additional Tough Tray accessories click here.

Optional Tough Tray II (RAM-234-6U) vs Included Tough Tray(RAM-234-3U):

Tough Tray II vs Tough Tray Size Comparison shown below:

Features

At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the flexible legs. The third flexible leg on the RAM Pod III should also be adjusted to help support the mount. The rigid flexible arms will hold everything you need safely and securely.

Universal No Drill Base with Single Swing Arm with RAM Tough Tray

Universal No Drill Base with Single Swing Arm with RAM Tough Tray