Description
**CLICK HERE for the Latest Fish Finder & Chartplotter Compatibility Guide for this Mount.**
The RAM-B-111RU is a 6.25 inch by 2 inch marine grade aluminum rectangular universal mounting plate with a standard sized length arm and rail base with stainless steel u-bolt (fits 1.0 inch rail diameter). The mounting plate can be used for many electronic devices including: CB Radios, HAM Radios, and Marine Electronics.
RAM-B-111RU shown above.
RAM-B-111RU Features and Options:
Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Material: Black powder coated marine grade aluminum with plastic twist knob, two 1 inch diameter rubber balls and stainless steel u-bolt.
NOTE: This marine grade aluminum plate can also be drilled into for a custom hole pattern without voiding the manufacturer's warranty.
Mounting Plate Dimensions: 6.25 inches * 2 inches with 1.0 inch diameter "B" sized rubber ball.
Socket Ball Size: Connects to 1.0 inch B Ball Size / Max. Weight 5 lbs.
Plate Description: RAM-B-111BU has many different combination of pre-drilled holes which will match many electronic devices including: CB Radios, Ham Radios, Marine GPS and other devices.
Rail Base Included: RAM-B-231U shown below is a black powder coated marine grade universal rail base with a stainless steel u-bolt for .75 inch to 1.0 inch diameter rail. The RAM-B-231U has a 1.0 inch diameter rubber ball. A plastic adapter the RAP-319 is available and will accommodate rail diameters to .5 inch. A larger stainless steel u-bolt is available: RAM-SU2512U to accommodate 1.0 inch to 1.25 inch rail diameters.
Rail Base Option (Not Included): RAM-B-235U shown below is an optional black powder coated marine grade aluminum rail mount with two stainless steel u-bolts for a .75 inch to 1.0 inch diameter rail. The RAM-B-235U has a 1.0 inch diameter rubber ball. If you wish to substitute for this part either build your own mount selecting the RAM-B-235U, RAM-B-201U and RAM-B-111BU or contact The Mount Depot.
Arm Included: RAM-B-201U shown below is a standard length marine grade aluminum arm 2.875 inches in length from socket center to socket center and 3.6875 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
- Security Option (Not Included)
:
- RAM-KNOB3LU keyed lock shown below is available and replaces the plastic twist knob found on the RAM-B-201 series arm.