Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Dia.) with Std Sized Arm & RAM-HOL-TAB-SMU Fits Most 7" Tablets with or Without Case (Includes 3 Sets of Cup Ends)

Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Dia.) with Std Sized Arm & RAM-HOL-TAB-SMU Fits Most 7" Tablets with or Without Case (Includes 3 Sets of Cup Ends)

Product Code: RAM-B-121-TAB-SMU

Price: $87.64

Please correct the following:

STOCK STATUS: In Stock - Ships Next Bus. Day

Description

The RAM-B-121-TAB-SMU is a yoke base clamp mount (accommodates a rail diameter from 0.625" to 1.25"), marine grade aluminum standard sized length arm and RAM-HOL-TAB-SMU universal SMALL tablet cradle holder.  The RAM-HOL-TAB-SMU is a high strength composite spring loaded, quick release cradle with three sets of interchangeable cup ends, designed to fit MOST 7 inch screen tablets.



This table cradle is compatible, see full specs below, with the following devices:


• Archos 7
• Asus EEE Pad Memo
• Barnes & Noble NOOKcolor
• BlackBerry PlayBook
• Dell Streak 7
• Google Nexus 7
  
• HTC Flyer
• Samsung Galaxy
• Most 7 inch screen tablets that fit within the specs listed below.

NOTE: As the manufacturer adds new units/models to the above series this cradle may fit additional models not listed above. Click here to see the latest cradle model information. Contact or email us by clicking here.

NOTE: It's VERY IMPORTANT to verify the dimensions of your tablet with or without a sleeve/case when determining the overall size.



RAM-B-121-TAB-SMU shown above. Electronic device not included.





RAM-B-121-TAB-SMU Includes the Following:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.

Yoke Mount Description: Includes RAM-B-121-238U. This aviation yoke mount includes the marine grade aluminum yoke base (accommodates a rail diameter from 0.625" to 1.25") with 1 inch rubber ball, standard sized length arm and diamond shaped adapter plate with 1 inch rubber ball. For additional information please click on the product link above.

Cradle Material: Black high strength composite. 

Cradle Hole Pattern: The back of the cradle has two pre-drilled holes compatible with the AMPS hole pattern (1.912 inches from center hole to center hole). 

Cradle Features:

1. Support cups contain open slots to accommodate for devices with or without bumpers/cases sleeves.
2. Back plate can support various size support cups.
3. Spring loaded tension provides secure support of device.
4. Spring loaded cradle allows for quick release of device.
5. The cradle allows all cables (NOT INCLUDED) to stay connected and all buttons/ports remain accessible.

• Cradle Dimensions with Large Cup Ends:
  • Height: 7.3" minimum to 9.62" maximum
  • Width: Maximum width to 5.31"
  • Depth: 1.06" Maximum
  
  
• Cradle Dimensions with Medium Cup Ends:
  • Height: 6.8" minimum to 9.0" maximum
  • Width: Maximum width to 5.31"
  • Depth: 0.125 minimum to 0.56" Maximum
  
  
• Cradle Dimensions with Small Cup Ends:
  • Height: 5.0" minimum to 9.1" maximum
  • Width: Maximum width to 4.7"
  • Depth: 0.125" minimum to 0.44" Maximum
  
  
• Included with Cradle:
  
• (1) Spring loaded back plate
• (2) Support cups for thin tablets with no skins
• (2) Support cups for thin tablets with thin or no skins
• (2) Support cups for thick tablets with cases
• Manufacturer's Cradle Description: Get the most out of your tablet with the Universal Tab-Tite cradle. With 3 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications.