Description
The RAM-B-176-AP9U is a fork stem motorcycle base (see fork stem opening requirements below), standard sized length arm, universal diamond adapter plate and cradle for the following devices:
NOTE: As the manufacturer adds new units/models to the above series this cradle may fit additional models not listed above. Click here for the most current model information for the RAM-HOL-AP9U cradle.
RAM-B-176-AP9U shown above.
RAM-B-176-AP9U Manufacturer Included Features:
NOTE: Manufacturer features and specifications can change without notice. Please visit the manufacturer's website for the latest product information.
-
Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
-
Click on individual links to view more product information.
-
Included Base: RAM-B-342U fork stem mount is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit.
-
This part is designed to fit into the cylindrical bore wall of fork stems and WILL WORK with stems that measure from 12 - 20mm and 28mm or .5 inch – 1.10 inch at the following intervals:
-
Metric Standard
12mm .5”
14mm .55”
16mm .63”
18mm .71”
20mm .79”
28mm 1.10”
-
1 inch diameter rubber ball is attached to the fork stem base.
-
Click here to see installation instructions for the RAM-B-342.
-
Included Arm: RAM-B-201U black powder coated marine grade aluminum standard sized length arm for 1 inch balls.
-
Measures 2.875 inches between socket centers.
-
Measures 3.6875 inches in overall total length.
-
The arm allows for easy adjustment by loosening the plastic side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached base accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.
-
Optional Arms:
-
RAM-B-201U-A 1.75 inches from socket center to socket center is available.
-
RAM-B-201U-C 5.25 inches from socket center to socket center is available.
-
Included Adapter: RAM-B-238U black powder coated marine grade aluminum universal diamond plate with attached 1 inch diameter rubber ball.
-
Two holes measuring 1.9 inches from center hole to center hole.
-
Compatible with AMPS hole pattern. The adapter will connect to RAM cradles (RAM-HOL-xxxx series) and third party cradles with the AMPS hole pattern.
-
Included Cradle: RAM-HOL-AP9U high strength plastic holder for the device(s) specified above attaches to the RAM-B-238U adapter. Place the top of the device into the cradle, and then push the base into the expandable arms at the bottom of the holder. The arms will then snap into place when the device is completely secured in the cradle. The cradle allows all cables (NOT INCLUDED) to stay connected and controls to be operated while the device is in the cradle.
-
Additional Cradle/ Holders/ Aqua Box: Click here to see additional cradles that can be purchased for the RAM-B-176 series including: Apple, cell, GPS and waterproof aqua boxes with soft touch flex lens.
-
OPTIONAL ACCESSORIES: Click here to see all popular options or on the Product Options tab above including self leveling cup holders, waterproof aqua boxes with soft touch flex lens, screen magnifiers, locking knobs, video camera adapters and more!
Click here to see popular options compatible with the RAM-B-176 series.
Features
Click here to view installation instructions for the RAM-B-342/RAM-B-176 series.