Description
The RAM-B-177-252025U is a marine grade aluminum U channel clamp base designed to mount to the lip edge of a flat surface 1.12 inches thick such as a glare shield on an airplane or car side window edge lip. Short sized length arm and RAP-B-379U-252025U 1/4"-20 X .25 threaded post adapter included. Commonly used for the following:
- Contour GPS
- Contour HD
- Sony Action Cam
- Sony Action Cam WiFi
RAM-B-177-252025U shown above.
RAM-B-177-252025U Includes the Following:
Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Base Description: Included RAM-B-259U powder coated marine grade aluminum u-channel clamp base. This glare shield clamp mount with clamp mounts is designed to mount to the lip edge of a flat surface up to 1.12 inch thick. The base has two plastic bolts that, when tightened, clamp the base to the lip surface. A RAM 1 inch diameter rubber ball is connected to the base.
- This mount will attach to flat surfaces with the following dimensions:
Min: 4.4mm / 0.17 inches
Max: 28.0mm / 1.12 inches
Arm Description: Included RAM-B-201U-A short sized length powder coated marine grade aluminum dual socket arm that measures 1.75 inches long from socket center to socket center and 2.4375 inches in total length. This arm allows a 1 inch diameter ball accessory to be connected at either end. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories. 
Adapter Description: Includes RAP-B-379U-252025 1/4"-20 X .25" threaded post with 1" diameter ball. 
