Description
The RAM-D-101U-C-IN1-C is a marine grade aluminum flat surface mount with a 3.68 inch diameter base plate with STEEL POST, short length sized arm and 3.68 inch diameter mounting plate with STEEL POST. Both base and mounting plates have pre-drilled holes.
RAM-D-101U-C-IN1 shown above.
NOTE: Base and mounting plate hardware is not included.
NOTE: The RAM-D-101U-C with Aluminum Post is commonly used for normal duty applications. The RAM-D-101U-C-IN1 with Steel Post is used for rugged duty applications.
RAM-D-101U-C-IN1 Features:
Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Material: Black powder coated marine grade aluminum with steel posts.
Socket Ball Size: Connects to 2.25 inch D Ball Size / Max. Weight 15 lbs.
Base and Mounting Plate Included: Two RAM-D-202U-IN1 shown below are included. The RAM-D-202U-IN1 is a universal marine grade aluminum 3.68 inch diameter plate with steel posts and a 2.25 inch diameter rubber D sized ball. The plate has pre-drilled holes. Three holes are the standard RAM pattern located 120 degrees apart plus one extra hole in between.
- Arm Included: RAM-D-201U-C shown below is the short length marine grade aluminum arm 3.1875 inches in length from socket center to socket center and 5.0625 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
