Ram 1500 (2019-Newer) Mount System (No Tray)

Ram 1500 (2019-Newer) Mount System (No Tray)

Product Code: RAM-VB-186ST1-SW2

Price: $215.99

Please correct the following:

STOCK STATUS: In Stock - Ships Next Bus. Day

Description




FREE DOMESTIC GROUND SHIPPING!

RAM-VB-186ST1-SW2 vehicle mount system for the following vehicles:

• DODGE Ram (2019-Newer) 1500 Series
  
  

NOTE: Click here for Airbag Safety and RAM Mounting Systems.

NOTE: For the vehicle base only see the RAM-VB-186ST1by clicking here.

Special Vehicle Requirements: Bucket seats only.


RAM-VB-186ST1-SW2 Manufacturer Included Components:

NOTE: Manufacturer components can change without notice.

NOTE: Click the links below for pictures and detailed part information.

• Swing Arm: RAM-VB-110-1U dual swing arms provide 12 inches of total horizontal extension. Includes RAM-202U 2.5 inch diameter plate with AMPS hole pattern.
• Upper Tele-Pole: RAM-VP-TTM8U 8 inch male upper tele-pole.
• Lower Tele-Pole: RAM-VB-TBF9U 9 inch female lower tele-pole.
• NOTE: Tele-poles feature a telescoping vertical height adjustment range from 12 to 18 inches.
• Vehicle Base: RAM-VB-186ST1 no-drill base for the specified vehicles.

RAM-VB-186ST1-SW2 Manufacturer Specifications:

NOTE: Manufacturer specifications can change without notice.

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
• Material: Black powder coated steel
• Seat Configuration: Bucket seats only. Call/email about bench seats.
• Installation: No-drill installation. Attaches to existing seat studs.
• Mount/Base Placement: Passenger side, front, where seat rail frame attaches to floor board.
  • NOTE: Vehicle base will limit seat travel.
• Vehicle Base Quick Disconnect: Optional. See RAM-VB-REM1 below.
• Vehicle Base Dimensions:
  • Dimension A: 17.0 inches
  • Dimension B: 6.18 inches
  • Dimension C: 1.81 inches
  • Center to Center Hole Seat Bolt Distance: 15.125 inches
  • NOTE: Center to Center Hole Seat Bolt Distance is the center hole distance of the two pre-drilled holes in the vehicle base that line up with the vehicle seat bolts. This distance MUST MATCH your vehicle.



RAM-VB-186ST1 Vehicle Base Options (NOT INCLUDED) Shown Below:

• RAM-VB-REM1 attaches to the vehicle base. This Remove-A-Pole quick disconnect allows the entire laptop system from the vehicle base up to be removed using the quick release pin, no tools required! Perfect for individuals using a vehicle for work and personal use. One of our most popular options.




Features

• Click here to view the RAM Mount Vehicle Laptop installation video.
• NOTE: If your vehicle is equipped with an airbag sensor under the seat disconnect the sensor before installing the vehicle base. (If unsure contact your local car dealer.) The video shown is for installation reference and may show additional or less parts than your vehicle base (RAM stabilizer foot that attaches to the base/lower tele-pole as shown in the video). Simply follow the video without installing these components if your vehicle base does not include these parts. Your vehicle base may connect to the seat track bolts differently than shown in the video. The instructions shown to install the RAM tele-pole system, swing arm assembly and Tough Tray are the same for all RAM No-Drill laptop systems regardless of the vehicle base used.
• NOTE: Click here to view Airbag Safety and RAM Mounting Systems (Adobe required).