RAM-VPR-104-1 RAM Vehicle Printer System for Epson, Intermec & O'Neil Printers

Description

The RAM-VPR-104-1 mobile printer cradle system is the perfect add-on to RAM laptop vehicle mounts. The RAM-VPR-104-1 is designed to fit the following models:

Epson TM-P60
Epson T88
Fujitsu FP-1000
Intermec PB2
Intermec PB3
Intermec PB20
Intermec PB21
Intermec PB22
Intermec PB40
Intermec PB41
Intermec PB42
O'Neil 2TE
O'Neil 4T
O'Neil 4TE
O'Neil 4TE with Card Reader

NOTE: This printer system will accommodate other printers with similar dimensions shown below in the technical drawing. Please call 224-578-9162 or complete the product inquiry form by clicking here if you have questions about your printer device.

RAM-VPR-104-1 shown above.

The RAM-VPR-104-1 Included Features:

Warranty: Manufacturer's, National Products Inc., life time warranty.
Material: Black powder coated marine grade aluminum.
Cradle Description: The RAM Quick Draw Jr. holders use a unique patent pending spring loaded mechanism that holds strong, yet provides easy removal for printer storage. At each end of the spring loaded cradle, RAM have designed a short side clamp plate that is designed to fit cleanly around either edge of the printer. This is the perfect accessory for the mobile professional who’s on the go. Light weight yet strong, these printer holders help get the job done.
Cradle Dimensions:
- Min Width: 5.625 inches
- Max Width: 10 inches
- Height Clearance for Printer: 2.25 inches

NOTE: Please see the RAM-VPR-105 series if you need the Tall Side Clamps (11 Max Width to 3.125 Max Height).
Mounting Assembly: The RAM-VPR-104-1 includes the RAM-101U-235U shown below:

Base Included: RAM-235U shown below is a universal round pipe rail base with two stainless steel u-bolts and 1.5 inch diameter rubber ball. The RAM-235U will connect to the RAM Tele-Pole found on RAM laptop vehicle mounts. The stainless steel u-bolts will accommodate a rail diameter from .75 to 1.25 inches.

Arm Included: RAM-201U shown below is the standard length double socket arm that measures 4.55 inches between socket centers and 5.625 inches in overall length. The arm is black powder coated marine grade aluminum with a plastic twist knob. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility.

Plate Included: RAM-202U shown below is a black powder coated marine grade aluminum 2.5 inch diameter round plate with pre-drilled holes and 1.5 inch diameter rubber ball. The plate will attach to the RAM-VPR-104 cradle.

Vehicle Printer System (Short Side Clamps) for Epson, Intermec & O'Neil Printers

Vehicle Printer System (Short Side Clamps) for Epson, Intermec & O'Neil Printers