Description
The RAP-B-104-224-GA20U is a universal high strength composite suction cup mount with a 3.25 inch diameter locking suction cup base and Garmin cradle. The suction cup mount consists
of a 1 inch diameter ball and socket with rotating and pivoting
button system and RAM plastic universal diamond plate. This device fits the following Garmin models:
- Garmin Rino 520
- Garmin Rino 520HCx
- Garmin Rino 530
- Garmin Rino 530HCx
Note: This mount assembly WILL NOT FIT the Rino 110, 120 and 130 Series. The RAM-HOL-GA8U is needed for the Rino 110, 120 and 130 series and can be viewed by clicking here.
NOTE: As
the manufacturer adds new units/models to the above series this cradle
may fit additional models not listed above. Please call 224-578-9162 or
complete the product inquiry form by clicking here.
RAP-B-104-224-GA20U shown above.
RAP-B-104-224-GA20U Includes the Following:
Warranty: Manufacturer's, RAM Mounts (National
Products Inc.), Limited Life Time Warranty.Mount End Plate Design: The
RAP-B-238 high strength composite universal plate has
a 1.0 inch diameter rubber ball connected at right angles to a 1.25 x
2.5 inch diamond plate. The plate has two holes positioned 1.9 inches from center hole to center hold and compatible with the AMPS hole pattern. Mount Arm Design:
The RAP-B-200-1 socket and octagon button arm includes a 1
inch B sized ball socket and is made of high strength plastic. The arm
is 1.75 inches long when measured from socket center to button socket
end. The side of the arm includes a tightening knob which allows you to
open and close the socket ends.Mount Base Design: The RAP-224-2 high strength plastic locking 3.25 inch diameter rubber suction cup base is designed to have an extra strong hold
on any smooth non-porous surface. With a twist on the locking knob, the
suction cup base adheres to any glass or non-porous plastic surface. Connected
to the top of the RAM suction cup is a male RAM plastic octagon button
with pivot connection. The pivot design allows the mount to tip from 0°
to 90° to the suction cup, while the octagon button connections allows
the arm to rotate 360°. The button end connects directly to a
RAP-B-200-1 composite arm with socket and female button ends.Cradle: RAM-HOL-GA20U high strength plastic cradle is designed to hold the Garmin device specified above. Place the top of the GPS unit into the cradle, and then push the base
into the expandable arms at the bottom of the holder. The arms will
then snap into place when the GPS is completely secured in the cradle.
The cradle allows all cables (not included) to stay connected while the
GPS unit is in the cradle.
RAP-B-104-224-GA20U Options Listed Below:
- Optional Cradles (NOT INCLUDED): To view additional optional compatible cradles for Apple, cell phone or GPS units click here.
