Description
The RAP-B-166-2-SPO4U universal suction cup mount is a high strength composite 2.7 inch diameter locking suction cup base, plastic arm and
universal diamond plate ideal for light duty
mounting applications such as GPS or small electronic devices. This suction cup mount is for the following models:
- SPOT Gen3 GPS Messenger Cradle
NOTE: As the
manufacturer adds new units/models to the above series this cradle may
fit additional models not listed above. Click here for the most current
model information RAM-HOL-SPO4U. Contact or email us by clicking here.
RAP-B-166-2-SPO4U shown above.
RAP-B-166-2-SPO4U Includes the Following:
Warranty: Manufacturer's, RAM Mounts (National
Products Inc.), Limited Life Time Warranty.Base: 2.7 inch locking suction cup base with 1 inch diameter rubber ball. This base has a strong hold on any smooth non-porous surface, but for best
results mount the suction cup base to a glass surface. Arm: RAP-B-201-1U composite arm measures approximately 2.0 inches between socket center to socket
center and is 2.75 inches in total length. A tightening screw on the side of the arm enables the sockets
to clamp firmly to a RAM 1 inch diameter ball. When loosening the side
screw, you can pivot the ball and socket connections or completely
disconnect the ball from the socket. The arm length is
Adapter: RAP-B-238U composite universal diamond plate. Two holes measuring 1.9 inches from center to center is compatible with the AMPS hole pattern and any RAM-HOL-xxxx cradle.
Cradle:
Includes the RAM-HOL-SPO4U high strength plastic holder. Place the top of the GPS into the cradle,
and then push the base into the expandable arms at the bottom of the
holder. The arms will then snap into place when the GPS is completely
secured in the cradle. The cradle allows all cables (NOT INCLUDED) to stay connected while the GPS unit is in the cradle.
