RAP-B-378-UN8U RAM Mount 2.5" Adhesive Base w/ X Grip Tablet Holder for 7" Screens

Description

The RAP-B-378-UN8U is a 2.5 inch diameter adhesive disk base, plastic arm and RAM-HOL-UN8BU X Grip II universal SMALL tablet holder. The RAM-HOL-UN8BU is a high strength composite spring loaded holder designed to fit MOST 7 inch screen tablets.

This table cradle is compatible, see full specs below, with the following devices:

Amazon Kindle
Apple iPad Mini
Archos 7
Asus EEE Pad Memo
Barnes & Noble NOOKcolor
BlackBerry PlayBook
Dell Streak 7
Google Nexus 7
HTC Flyer
Samsung Galaxy
Most 7 inch screen tablets that fit within the specs listed below.

NOTE: This cradle may fit other models not listed above. Contact or email us by clicking here.

NOTE: It's VERY IMPORTANT to verify the dimensions of your tablet with or without a sleeve/case when determining the overall size.

RAP-B-378-UN8 shown above.

RAP-B-378-UN8U Includes the Following:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Included Base: RAP-B-378U 2.5 inch adhesive disk base with 1 inch diameter rubber ball. Put the base practically anywhere you want to keep your handheld device easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy.
Included Arm: RAP-B-201U composite arm measures approximately 2.875 inches between socket center to socket center and is 3.69 inches in total length. A tightening knob on the side of the arm enables the sockets to clamp firmly to a RAM 1 inch diameter ball. When loosening the side knob, you can pivot the ball and socket connections or completely disconnect the ball from the socket.
Holder Material: Black high strength composite and rubber tips.
X Grip II RAM-HOL-UN8BU Holder Features:
- Spring loaded holder expands and contracts for perfect fit of your table.
- Rubber coated tips will hold your tablet firm and stable.
- Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts.
- Socket technology allows for multiple adjustment angles and articulation of your tablet.
- Easy access grip knobs, located on the back of the holder for quick release of your tablet.
X Grip II RAM-HOL-UN8BU Holder Dimensions:
- Minimum Width = 2.25 inches
- NOTE: (Devices 2.25" in width must be a minimum of 7" in height to fit)
- Maximum Width = 5.75 inches
- Depth = 0.875 inches

Manufacturer's RAM-HOL-UN8BU Description: The RAM-HOL-UN8BU consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BU expands and contracts for perfect fit of most 7 inch tablets.

Features

General recommendations to properly adhere the adhesive disc.
1. Ensure that both the dashboard surface and the bottom of the Ram Mount base have been thoroughly cleaned and dried.
2. Attach either side of adhesive to the base first, let it sit several hours to allow adhesive to thoroughly bond.
3. Attach other side of adhesive (with base) to the dashboard surface.
4. Let the adhesive disc sit several hours before adding socket arm components, etc. to allow the adhesive to properly bond to the dashboard surface.

2.5 Inch Adhesive Base with Composite Standard Sized Arm and RAM-HOL-UN8BU SMALL Universal Tablet Holder fits MOST 7-8" Screens Tablets (Fits Device Width 2.5" to 5.75")

2.5 Inch Adhesive Base with Composite Standard Sized Arm and RAM-HOL-UN8BU SMALL Universal Tablet Holder fits MOST 7-8" Screens Tablets (Fits Device Width 2.5" to 5.75")