themountdepot.com

RAM-101-2461-225BU Features:

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
• Material: Black powder coated marine grade aluminum. Rubber ball and socket help dampen vibration.
• Socket Ball Size: Connects to 1.5 inch C Ball Size / Max. Weight 10 lbs.
• Base Plate Included: RAM-202U shown below is a black powder coated marine grade aluminum universal 2.5 inch diameter plate with a 1.5 inch rubber ball. The plate has pre-drilled holes, including the universal AMPS hole pattern.

• Arm Included: RAM-201U shown below is a standard length marine grade aluminum arm 4.55 inches in length from socket center to socket center and 5.625 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
  

• VESA Plate Design: The plate is the RAM-2461U VESA standard plate with an 1.5 inch diameter ball connected to a 3.68 inch square plate. The plate consists of the 4 x 75mm VESA hole pattern. Each hole is 25mm in diameter.
  

• Backer Plate Included:

  • RAM-202-225BU 3” x 3” steel backer plate with 10-24 threaded holes.
  • (QTY. 1), 3” x 3” steel backer plate with 8 x 10-24 tapped holes, AMPS and 1.5” x 2” hole patterns
  • (QTY. 4), 10-24 x 1” pan head, phillips drive screws with thread locker applied
  • (QTY. 4), 10-24 black zinc plated nylock nuts