Home > RAM Assemblies & Parts > Swing Arm Assemblies and Parts > Horizontal Swing Arm Assemblies >

Horizontal Surface Base with Dual 6 Inch Bent Swing Arms and Universal 6.25 Inch x 2 Plate (RAM-111U Series Compatible)
Horizontal Surface Base with Dual 6 Inch Bent Swing Arms and Universal 6.25 Inch x 2 Plate (RAM-111U Series Compatible)
 
Alternative Views:
Price $122.49

STOCK STATUS: In Stock - Ships Next Bus. Day

Free Shipping
Product Code: RAM-109H-1U
QTY:

DESCRIPTION
 
**CLICK HERE for the Latest Fish Finder & Chartplotter Compatibility Guide for this Mount.**

The RAM-109H-1U double swing arm mount consisting of two 6 inch long bent swing arms (12 inches in total length) mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25 inch x 2 inch plate. There are three pivoting points on the mount. One at the swing arm, one at the base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation.


RAM-109H-1U shown above. NOTE: Mounting hardware is not included.
A. Overall length: 16.69 inches.
B. Overall height: 8.577 inches.
C. Height from bottom of base to top of knob: 4.89 inches.

RAM-109H-1U Features:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Moutning Plate Material: Black powder coated marine grade aluminum with pre-drilled holes. NOTE: This marine grade aluminum plate can also be drilled into for a custom hole pattern without voiding the manufacturers warranty.
  • Mounting Plate Dimensions: 6.25 inches * 2 inches.
  • Mounting Plate Description: RAM-111BTU has many different combination of pre-drilled holes which will match many electronic devices including: CB Radios, Ham Radios, Marine GPS and other electronic devices.

  • Base Plate Included: RAM-109H-B shown below is a marine grade aluminum horizontal base with 4 pre-drilled mounting holes. Mounting hardware is NOT included.
  • Swing Arms Included: Two RAM-109-1APU's shown below are included. Each swing arm is a bent 6 inch long extension and includes a 3 inch long bolt, washers and tightening knob. One swing arm will connect directly to the RAM-109H-B horizontal base. The other swing arm will connect to the RAM-111BTU rectangular base plate.

ACCESSORIES FOR THIS PRODUCT...
RAM Pin-Lock Security Kit for Double Swing Arms 2.5" Dia. Base with 1.5" Dia. Rubber Ball, STANDARD Sized Length Arm and RAM-202U-24 2 Inch x 4 Inch Plate with Pre-Drilled Holes (Fits Humminbird Helix 7) RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System and Round Flat Surface Base 2.5" Dia. Base with 1" Dia. Rubber Ball, STANDARD Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes
Price $31.99

Add Free Shipping
Price $60.99

Add Free Shipping
Price $42.49

Add Free Shipping
Price $30.00

Add Free Shipping
RAM Pin-Lock Security Kit for Double Swing Arms 2.5" Dia. Base with 1.5" Dia. Rubber Ball, STANDARD Sized Length Arm and RAM-202U-24 2 Inch x 4 Inch Plate with Pre-Drilled Holes (Fits Humminbird Helix 7) RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System and Round Flat Surface Base 2.5" Dia. Base with 1" Dia. Rubber Ball, STANDARD Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes


Browse for more products in the same category as this item:

RAM Assemblies & Parts > Swing Arm Assemblies and Parts > Horizontal Swing Arm Assemblies
RAM Assemblies & Parts > C Ball = 1.5" Ball Assemblies & Parts / Max. Weight 10 lbs. > 1.5" C Ball Assemblies
Flat Surface Mounts > C-Ball = 1.5" Ball Mounts & Parts / Max. Weight 10 lbs. > Flat Surface Assemblies
Fishing & Paddlesport > Marine - Fish Finder and Chartplotter Assemblies (Garmin, Humminbird, Lowrance, Raymarine, etc.) > 1.5" C-Ball Sized Assemblies (10 Pound Max) > RAM-111 Series Assemblies
Fishing & Paddlesport > Marine - Fish Finder and Chartplotter Assemblies (Garmin, Humminbird, Lowrance, Raymarine, etc.) > Swing Arm Assemblies and Parts > RAM-111 Series Swing Arm Assemblies