Home > Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Flat Surface RAM-B-138 Assemblies >

Universal COMPOSITE Clamp Base (Fits Rail/Edge Lip from 0.625 to 1.25") with Standard Sized Arm & RAM-HOL-UN4U Univ. Finger Gripping Cradle (Fits Device Width 1.25" to 3.5" Including GPS, eTrex, 2 Way Radios, Smartphones with Cover/Case iPhone, Droid etc)
Universal COMPOSITE Clamp Base (Fits Rail/Edge Lip from 0.625 to 1.25") with Standard Sized Arm & RAM-HOL-UN4U Univ. Finger Gripping Cradle (Fits Device Width 1.25" to 3.5" Including GPS, eTrex, 2 Way Radios, Smartphones with Cover/Case iPhone, Droid etc)
 
Price $75.99

STOCK STATUS: Out of Stock - Email for ETA

Free Shipping
Product Code: RAP-B-121-UN4U
QTY:

DESCRIPTION
 
The RAP-B-121-UN4U is a composite clamp base mount assembly that will accommodate a rail or edge lip from 5/8 inch to 1.25 inches (commonly used in aviation or golf cart applications). The assembly includes a standard sized length arm, diamond shaped adapter plate and universal finger gripping cradle.

NOTE: This cradle includes 3 sets of different sized arms that will fit devices within the dimensions listed below:
  • Cradle Height Clamping Dimensions:
    Minimum Height with Top and Bottom Plates: 5.25'' *
    Maximum Height with Top and Bottom Plates: 6.0'' *
    * The top and bottom plates can be removed for larger devices.
  • Spine/Back Plate Physical Dimensions: 2.5W x 5.0H''                          
  • Using Short Arm Side Clamps:
Maximum Depth: 0.75''
Minimum Width: 1.25''
Maximum Width: 3.0''
  • Using Medium Arm Side Clamps:
    Maximum Depth: 1.25''
    Minimum Width: 1.5''
    Maximum Width: 3.5''
  • Using Long Arm Side Clamps:
    Maximum Depth: 1.6''
    Minimum Width: 2.25''
    Maximum Width: 3.5''
NOTE: If you have questions, please call 224-578-9162 or complete the product inquiry form by clicking here.




RAP-B-121-UN4U shown above. 

RAP-B-121-UN4U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black high strength composite.
  • Socket Ball Size: B-Ball Size = 1.0 inch Ball. Maximum suggested weight 2 lbs. 
  • Clamp Base Description: RAP-B-121BU composite clamp base mount accommodates a rail or edge lip from 5/8 inch to a maximum of 1.25 inches. The 1 inch rubber ball sits at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the clamps around the rail or edge and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails. The rail does not need to be perfectly round to use this base.
  • Arm Description: RAP-B-201U composite standard sized length arm for 1 inch balls. The arm measures 2.875 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction. 
  • Adapter Description: RAP-B-238U composite universal diamond plate with two holes measuring 1.9 inches from hole center to hole center and accommodates the AMPS hole pattern.
  • Cradle/Holders: RAM-HOL-UN4U plastic finger grip cradle is designed to hold a large amount of different kinds of cell phones (Blackberry and iPhones, smarthphones, etc.) and electronic devices such as GPS (Garmin eTrex, nuvi) and MP3 players. This is a popular holder for ATVs and motorcycles. The RAM-HOL-UN4U has four rubber coated finger placed along the side of the cradle that grips any electrical device you need to hold.  The bottom of the cradle has a plate that provides additional support to the electronic device being held.
  • Second Mounting Ball: Optional. Add the RAP-B-121BBU creating a double ball base. This 1 inch diameter ball allows a second mounting point to add additional accessories. The mounting point is located on top of the RAP-B-121BU base.
Manufacturer's Description: The RAM composite glareshield/yoke base is ideally suited for a day on the wing and yet easily removed for travel in the flight bag. Both strong and light weight, this new clamping base is perfect for numerous electronic devices commonly found in the cockpit. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, or add a second ball to mount another device; brilliant. Crafted to hold firm to most glare shields, yokes, or tubing, practically any aircraft can benefit from this product. Simple to use and exceptionally versatile, RAM has created another “must have” for any pilot. Once you’ve had a chance to use this great little device, we’re confident you’ll find uses for it no matter what you fly, drive, or ride. With everything you get in this package, you may even find yourself using your new RAM Mount on a golf cart, work bench, or even exercise equipment. With RAM, there are no limits.

The composite glareshield/yoke mount will fit a rail or edge lip from 5/8" to a maximum of 1 1/4". The mounting base can also accept a second ball RAP-B-121BBU giving you the ultimate double ball base. To mount the base, simply place the clamp ends around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes, golf buggies or unusual shaped motorbike rails.


Browse for more products in the same category as this item:

Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Flat Surface RAM-B-138 Assemblies
Smartphone Mounts > Aviation Universal Cell & Smartphone Assemblies > Finger Gripping Universal Assemblies
Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Yoke Mount Assemblies (Fits .5" to 2.58" Rail Diameter) > Composite Yoke Assemblies RAP-B-121 Series Assemblies (Fits 0.625" to 1.25" Rail Diameter) > Universal Assemblies (iPhone, Smartphone, Netbook, Tablet, etc.)
Smartphone Mounts > Universal Cell & Smartphone Assemblies by Device Width (Fits Width Range from .875" to 4.5") > UN4U Series Assemblies (1.25" to 3.5" Device Width)
All iPhones Except Plus Series (UN4U Finger Gripping Cradle) WORKS WITH Case/Cover/Skin