themountdepot.com

RAM-VB-184T-SW1 shown above.

RAM-VB-184T-SW1 Included Features:

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
• RAM-VB-184 Base Included Shown Below:

• RAM-VB-184 Base Hole Patterns Below:
  
  • 100 * 100mm
  • 75 * 75mm
  • 50 * 100mm
  • AMPS hole pattern
  • RAM Three holes at 120 degrees
• RAM-VB-184 Base U-Bolt Dimensions: Accommodates rail diameter tube from .625 inch to 1.5 inch diameter.
• Base Description: Truck fleets world wide will appreciate the well crafted universal Multi-Function vehicle base now offered by RAM. Considering the wide variety of seating arrangements in the commercial vehicle market, this new vehicle base is reversible by design. Now installers don’t have to choose between locating a flat surface or round tubing to attach to under the vehicle seat. RAM has you covered with either configuration. Tubing framed seats can be attached to in minutes using the supplied u-bolts. Once in place and safely secured, several hole patterns are available allowing the freedom to choose how best to create your custom mounting solution. Steel box frame seats need only four discrete holes drilled to secure the base.
• RAM-VB-184 Hardware Included: Supplied u-bolt hardware, attach any number of RAM pedestal mounts to create a mounting system unmatched in its versatility and stability.
• Hardware NOT INCLUDED: Hardware to secure the RAM-VB-184T-SW1 base to the flat surface is not included. 4 bolts/nuts are recommended to secure the base.
• Telescoping Pole Included: "Tele-Pole" showed assembled with bottom tele-pole RAM-VC-PF-85 and upper tele-pole RAM-VB-TTM8U (far left picture below). The tele-pole allows a height adjustment range from 11 to 16 inches. For an even more custom installation, the tele-pole may be easily cut with a hack saw to a more desired length.
  

• Upper Tele-Pole: RAM-VP-TTM8U black powder coated steel 8 inch upper tele-pole mates to the articulating arm and lower tele-pole.
• Upper Tele-Pole Dimensions: A = 1.328" OD, B = 2.5", C = 8"

• Lower Tele-Pole: RAM-VC-PF-85 black powder coated steel 8.5 inch lower tele-pole mates to the upper tele-pole and vehicle base.
• Lower Tele-Pole Dimensions: A = 1.375" OD, B = 3.5", C = 8.5"
  
• Articulating Arm Included: RAM-VB-110-1U black powder coated steel dual swing arm with 12 inches of total extension. Connects to the Tough Tray and upper tele-pole.
  

• Tough Tray Included: RAM-234-3 Laptop "Tough Tray" high strength composite spring loaded expandable tray. Accommodates laptops from 9.625 to 16 inches wide (screen sizes up to 17 inches). The tray includes 4 side clamping fingers with rubber grips. The fingers are fully adjustable and can be moved both vertically and horizontally.
  • Tray Depth: 10.0 inches
  • Tray Thickness: 2.125 inches
  • Tray Width (Expansion): 9.625 inches to 16 inches NOTE: Works with most 17 inch screen laptops.
  • Side Clamp Arm Height: 0.5 inch (min) to 1.75 inches (max)

NOTE: RAM MOUNT RECOMMENDS the optional RAM-234-SNMU Safe-n-Secure kit shown below if the laptop mount is intended to hold an electronic device while the VEHICLE IS IN MOTION.

• Click here to view Tough Tray accessories (i.e. Screen Support).
• Click here to view Tele-Pole accessories (i.e. Remove-A-Pole).
• Click here to view all printer mounts.
• Click here to view all laptop accessories.