Home > Pedestal Stands > Medium Duty - Non-Telescoping >

Universal Drill Down Pivot Base with 24 Inch Post and Two Double Ball Socket Arms for Electronic Devices
Universal Drill Down Pivot Base with 24 Inch Post and Two Double Ball Socket Arms for Electronic Devices
 
Price $250.49

STOCK STATUS: In Stock - Ships Next Bus. Day

Free Shipping
Product Code: RAM-101U-VE10
QTY:

DESCRIPTION
 
RAM-101U-VE10 is a universal drill down pedestal stand that with a 24 inch pole that can be used to secure many electronic devices. This universal stand has a pivoting base that allows the base to be secured to an angled horizontal or vertical surface and has two double socket arms. The assembly is approximately 34 inches at maximum extension.


RAM-101U-VE10 show above.




RAM-101U-VE1 dimensions shown above.
The RAM-101U-VE10 includes dual socket arms and a 24 inch pole.
The above picture shows the RAM-101U-VE1 with an 18 inch pole versus the 24 inch pole included with the RAM-101-VE10.


NOTE: The RAM-101U-VE10 DOES NOT INCLUDE mounting hardware for the base.

RAM-101U-VE10 Included Features:
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • RAM-282U: Includes the RAM-282U 5 inch square plate with female pivot lock at 90 degrees. The pivoting lock allows the base to set at any any angle between horizontal and vertical to the mount. Connects to arm with male teeth RAM-284U to form an articulating base for angled surfaces. Includes 8 pre-drilled holes for surface connection.
    


  • NOTE: HARDWARE NOT INCLUDED: Hardware to secure the RAM-282U base to the surface is not included. 4 bolts/nuts are recommended to secure the base.
  • RAM-284U: Includes the RAM-284U is a .5 inch pipe clamp with a male pivot lock. This part attaches to the RAM-282U to form an articulating base for angled surfaces.
    
    

  • RAM-PA8224: Includes the RAM-PA8224 24 inch long rigid aluminum 1/2 inch diameter pipe is powder coated and has a 1/2 inch NPT Male thread at either end. This arm is commonly used for many laptop tray mounting systems or to secure other electronic devices.
    
  • RAM-217-3U: Includes the RAM-217-3U: Two 1.5 C size balls with .5 NPT female thread.
    • NPT Size: Two 1.5 inch C sized balls and .5 inch NPT female thread.
    • Description: The RAM-217-3U connects to any .5 inch NPT male thread, including the RAM-PA-82xx series. The double balls can connect to any 1.5 inch C ball sized accessory.
       
  • RAM-201U: Includes two RAM-201U standard sized length arms.
    • Arm Material: Black powder coated marine grade aluminum with plastic twist knob.
    • Arm Length Socket Center to Socket Center: 4.55 inches.
    • Overall Arm Length: 5.625 inches.
        
  • RAM-202U: Includes two RAM-202U 2.5 inch diameter plates.
    • Plate Material: Black powder coated marine grade aluminum.
    • AMPS Hole Pattern: Yes. The base has seven holes including the universal AMPS hole pattern.
    • Plate Diameter: 2.5 inch diameter.
       

ACCESSORIES FOR THIS PRODUCT...
Laptop Power Caddy for Tough Tray Adjustable 24 Inch Stabilizer Leg for Tele-Pole Vehicle Printer System for Brother PocketJet Brother PocketJet 3, 3 Plus, 6, 6 Plus, 7 & 673 Universal Laptop Tough Tray with Curved Clamping Arms with Rubber Grip
Price $15.99

Add Free Shipping
Price $49.99

Add Free Shipping
Price $125.49

Add Free Shipping
Price $69.99

Add Free Shipping
Laptop Power Caddy for Tough Tray Adjustable 24 Inch Stabilizer Leg for Tele-Pole Vehicle Printer System for Brother PocketJet Brother PocketJet 3, 3 Plus, 6, 6 Plus, 7 & 673 Universal Laptop Tough Tray with Curved Clamping Arms with Rubber Grip
Tough Tray Secure-N-Motion Kit 6" Straight Swing Arm Extension for Tele-Pole Systems Universal Spring Loaded Tough Tray II for Medium Sized Devices (Netbooks, iPads, Tablets) - Fits Device Width from 8.56" to 11.12" Tilt-N-Turn 45 Degree Motion Attachment (No Swing Arm)
Price $66.49

Add Free Shipping
Price $35.49

Add Free Shipping
Price $43.99

Add Free Shipping
Price $44.49

Add Free Shipping
Tough Tray Secure-N-Motion Kit 6" Straight Swing Arm Extension for Tele-Pole Systems Universal Spring Loaded Tough Tray II for Medium Sized Devices (Netbooks, iPads, Tablets) - Fits Device Width from 8.56" to 11.12" Tilt-N-Turn 45 Degree Motion Attachment (No Swing Arm)
Vehicle Printer System for HP-450, HP-460, HP-470 Officejet 100 & Printek Field Pro Screen Support Arm w/ Spring Loaded Keeper for Tough Tray Tilt-N-Turn 90 Degree Attachment
Price $115.49

Add Free Shipping
Price $20.99

Add Free Shipping
Price $46.99

Add Free Shipping
Vehicle Printer System for HP-450, HP-460, HP-470 Officejet 100 & Printek Field Pro Screen Support Arm w/ Spring Loaded Keeper for Tough Tray Tilt-N-Turn 90 Degree Attachment


Browse for more products in the same category as this item:

Pedestal Stands > Medium Duty - Non-Telescoping