themountdepot.com

RAM-101U-VE1 shown above.

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
• RAM-282U: Includes the RAM-282U 5 inch square plate with female pivot lock at 90 degrees. The pivoting lock allows the base to set at any any angle between horizontal and vertical to the mount. Connects to arm with male teeth RAM-284U to form an articulating base for angled surfaces. Includes 8 pre-drilled holes for surface connection.

• NOTE: HARDWARE NOT INCLUDED: Hardware to secure the RAM-282U base to the surface is not included. 4 bolts/nuts are recommended to secure the base.
  
• RAM-284U: Includes the RAM-284U is a .5 inch pipe clamp with a male pivot lock. This part attaches to the RAM-282U to form an articulating base for angled surfaces.

• RAM-PA8218: Includes the RAM-PA8218 18 inch long rigid aluminum 1/2 inch diameter pipe is powder coated and has a 1/2 inch NPT Male thread at either end. This arm is commonly used for many laptop tray mounting systems or to secure other electronic devices.

• RAM-218-1U: Includes the RAM-218-1U: 1.5 C size ball with .5 NPT female thread.
  
  • NPT Size: 1.5 inch C ball size and .5 inch NPT female thread.
  • Description: The RAM-218-1U connects to any .5 inch NPT male thread, including the RAM-PA-82xx series. The single socket can connect to any 1.5 inch C ball sized accessory.

• RAM-201U: Includes the RAM-201U standard length arm:
  • Arm Material: Black powder coated marine grade aluminum with plastic twist knob.
  • Arm Length Socket Center to Socket Center: 4.55 inches.
  • Overall Arm Length: 5.625 inches.

• RAM-202U: Includes the RAM-202U 2.5 inch diameter plate.
  • Plate Material: Black powder coated marine grade aluminum.
  • AMPS Hole Pattern: Yes. The base has seven holes including the universal AMPS hole pattern.
  • Plate Diameter: 2.5 inch diameter.

• NOTE: Please call 224-578-9162 or complete the product inquiry form by clicking here if you need assistance.

• Optional RAM-234-3 Tough Tray: RAM-234-3 Laptop "Tough Tray" high strength composite spring loaded expandable tray. Accommodates laptops from 9.625 to 16 inches wide (screen sizes up to 17 inches). The tray includes 4 side clamping fingers with rubber grips. The fingers are fully adjustable and can be moved both vertically and horizontally.
  • Tray Depth: 10.0 inches
  • Tray Thickness: 2.125 inches
  • Tray Width (Expansion): 9.625 inches to 16 inches NOTE: Works with most 17 inch screen laptops.
  • Side Clamp Arm Height: 0.5 inch (min) to 1.75 inches (max)

• Optional RAM-234-6 Tough Tray: RAM-234-6 Tough Tray II is smaller in size, compared to the original Tough Tray (RAM-234-3), making it more versatile in mounting various types of smaller laptops (netbooks), tablets and portable DVD players.
• Tough Tray II Dimensions: The device dimensions the RAM-234-6 Tough Tray II will accommodate are listed below:
  • Tray Depth: 6.0 inch
  • Tray Thickness: 1 inch
  • Tray Width (Expansion): 8.56 inches to 12.31 inches
  • Side Clamp Arm Height: To 1 inch (maximum)

• RAM-234-3 and RAM-234-6 Available Options:
  
  • RAM-234-S2U locking screen support secures the laptop screen in a locked position. Available for both RAM-234-3 and RAM-234-6.
  • RAM-234K1-4U flat side arms allow the laptop lid to close flat when not in use. NOTE: RAM-234-6 comes standard with 4 flat side arms.
  • RAM-234-5U power caddy secures power adapters and cords. Available for both RAM-234-3 and RAM-234-6.
  • RAM-234-SNMU Safe-n-Secure kit shown above is recommended if the laptop mount is intended to hold an electronic device while the vehicle is in motion. Available for the RAM-234-3 only.
  • All Tough Tray options can be viewed by clicking here.
    

Optional RAM-234-5U Power Caddy and RAM-234-S2U Screen Support show above.


RAM-234K1-4U Flat Side Arms and RAM-234-SNMU Secure-N-Motion shown above.

and VESA plates, and Tough Tray II for medium sized electronic devices.