Home > RAM Assemblies & Parts > Swing Arm Assemblies and Parts > Vertical Swing Arm Assemblies >

Vertical Surface Base with 6 Inch Bent Swing Arm and Universal 6.25 Inch x 2 Plate (RAM-111U Series Compatible)
Vertical Surface Base with 6 Inch Bent Swing Arm and Universal 6.25 Inch x 2 Plate (RAM-111U Series Compatible)
 
Price $93.49

STOCK STATUS: In Stock - Ships Next Bus. Day

Free Shipping
Product Code: RAM-109VU
QTY:

DESCRIPTION
 
**CLICK HERE for the Latest Fish Finder & Chartplotter Compatibility Guide for this Mount.**
The RAM-109VU single swing arm mount consists of a 6 inch long bent swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25 inch x 2 inch plate. There are two pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation.


RAM-109VU shown above. NOTE: Mounting hardware is not included.
A. Center of knob to center of ball socket: 6 inches.
B. Overall length of swing arm assembly: 11.4375 inches.
C. Overall height: 8.45 inches.
CLICK HERE to see the PDF drawing.

RAM-109VU Features:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Top Plate Material: Black powder coated marine grade aluminum with pre-drilled holes. Please see the bottom of the page for a list of marine devices this plate will accommodate with the standard pre-drilled hole pattern. NOTE: This marine grade aluminum plate can also be drilled into for a custom hole pattern without voiding the manufacturers warranty.
  • Top Plate Dimensions: 6.25 inches * 2 inches.
  • Top Plate Description: RAM-111BTU has many different combination of pre-drilled holes which will match many electronic devices including: CB Radios, Ham Radios, Marine GPS and other electronic devices.

  • Base Plate Included: RAM-109V-B shown below is a marine grade aluminum vertical base with 4 pre-drilled mounting holes. Mounting hardware is NOT included.
  • Swing Arm Included: RAM-109-1APU shown below is a bent 6 inch long swing arm extension and includes a 3 inch long bolt, washers and tightening knob. The 3 inch bolt will allow the swing arm to connect to a RAM-109V-B base and the other end of the swing arm will connect to the RAM-111BTU rectangular base plate.

ACCESSORIES FOR THIS PRODUCT...
2.5" Dia. Base with 1.5" Dia. Rubber Ball, LONG Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled (Overall Height: 10.85") 2.5" Dia. Base with 1.5" Dia. Rubber Ball, SHORT Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes (Overall Height: 5.225") 2.5 Inch Diameter Aluminum Base with 1.5 Inch Dia. Ball RAM Pin-Lock Security Kit for Single Curved Swing Arms
Price $82.49

Add Free Shipping
Price $56.49

Add Free Shipping
Price $16.49

Add Free Shipping
Price $24.49

Add Free Shipping
2.5" Dia. Base with 1.5" Dia. Rubber Ball, LONG Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled (Overall Height: 10.85") 2.5" Dia. Base with 1.5" Dia. Rubber Ball, SHORT Sized Length Arm and Universal 6.25 Inch x 2 Inch Plate with Pre-Drilled Holes (Overall Height: 5.225") 2.5 Inch Diameter Aluminum Base with 1.5 Inch Dia. Ball RAM Pin-Lock Security Kit for Single Curved Swing Arms
Double Socket Arm Keyed Lock for RAM-201 Series with 1/4"-20 Brass Hole RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System and Round Flat Surface Base 2.5" Dia. Base with 1.5" Dia. Rubber Ball, STANDARD Sized Length Arm, Universal 6.25 Inch x 2 Inch Plate and Double Adapter Plate Double Adapter Plate for Electronic Devices (Compatible with RAM-B-111BU and RAM-111BU)
Price $31.99

Add Free Shipping
Price $42.49

Add Free Shipping
Price $68.23

Add Free Shipping
Price $15.49

Add Free Shipping
Double Socket Arm Keyed Lock for RAM-201 Series with 1/4"-20 Brass Hole RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System and Round Flat Surface Base 2.5" Dia. Base with 1.5" Dia. Rubber Ball, STANDARD Sized Length Arm, Universal 6.25 Inch x 2 Inch Plate and Double Adapter Plate Double Adapter Plate for Electronic Devices (Compatible with RAM-B-111BU and RAM-111BU)
Double Socket Short Sized Length Arm for 1.5 Inch Ball (3.5 Inches in Overall Length) Double Socket Long Sized Length Arm for 1.5 Inch Ball (9.125 Inches in Overall Length) Double Socket Standard (Medium) Sized Length Arm for 1.5 Inch Ball (5.625 Inches in Overall Length)
Price $26.49

Add Free Shipping
Price $52.99

Add Free Shipping
Price $28.99

Add Free Shipping
Double Socket Short Sized Length Arm for 1.5 Inch Ball (3.5 Inches in Overall Length) Double Socket Long Sized Length Arm for 1.5 Inch Ball (9.125 Inches in Overall Length) Double Socket Standard (Medium) Sized Length Arm for 1.5 Inch Ball (5.625 Inches in Overall Length)


Browse for more products in the same category as this item:

RAM Assemblies & Parts > Swing Arm Assemblies and Parts > Vertical Swing Arm Assemblies
RAM Assemblies & Parts > C Ball = 1.5" Ball Assemblies & Parts / Max. Weight 10 lbs. > 1.5" C Ball Assemblies
Flat Surface Mounts > C-Ball = 1.5" Ball Mounts & Parts / Max. Weight 10 lbs. > Flat Surface Assemblies
Fishing & Paddlesport > Marine - Fish Finder and Chartplotter Assemblies (Garmin, Humminbird, Lowrance, Raymarine, etc.) > 1.5" C-Ball Sized Assemblies (10 Pound Max) > RAM-111 Series Assemblies
Fishing & Paddlesport > Marine - Fish Finder and Chartplotter Assemblies (Garmin, Humminbird, Lowrance, Raymarine, etc.) > Swing Arm Assemblies and Parts > RAM-111 Series Swing Arm Assemblies