themountdepot.com

The RAM-111U-DL is a 6.25 inch by 2 inch rectangular marine grade aluminum universal mounting plate. A 2.5 inch diameter base plate with 1.5 inch diameter rubber ball and long length sized arm with locking knob. The mounting plate can be used for many electronic devices including: CB Radios, HAM Radios, and Marine Electronics.

RAM-111U-DL shown above. Mounting hardware is not included.

RAM-111U-DL Features:

• Base Plate Included: RAM-202U shown below is a marine grade aluminum universal 2.5 inch diameter plate with a 1.5 inch diameter "C" sized rubber ball. The plate has pre-drilled holes, including the universal AMPS hole pattern.

• Arm Included: RAM-201U-D shown below is a long length "D" marine grade aluminum arm 8.75 inches in length from socket center to socket center and 9.125 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
  
• Locking Knob Included: RAM-KNOB5LU brass keyed locking knob with two keys. Works with 1.5 inch ball socket arms only (RAM-201 Series). This device allows the knob to be locked in place and prevents unscrewing of the arm and theft.
• NOTE: Picture shown below is without the keyed locking knob. The RAM-111U-DL includes the locking knob and the picture shown below is for illustration purposes.