Home >

Flat Surface Mount with RAM-HOL-UN3U Large Holder (Fits Device Width 2.32" to 3.37") Fits Most Smartphones with Cover/Case iPhone, Droid, etc.
Flat Surface Mount with RAM-HOL-UN3U Large Holder (Fits Device Width 2.32" to 3.37") Fits Most Smartphones with Cover/Case iPhone, Droid, etc.
 

STOCK STATUS: Out of Stock - Email for ETA

Free Shipping
Product Code: RAM-B-102-UN3U
QTY:

DESCRIPTION
 
The RAM-B-102-UN3U is a flat surface marine grade aluminum mount that has a universal diamond shaped base with pre-drilled holes (hardware not included), standard sized length arm and large sized side clamping universal electronics holder. The holder will fit devices between the following dimensions:
  • Minimum width: 2.25 inches
  • Maximum width: 3.37 inches
  • Side Clamp Height: 1.75 inches
  • Side Clamp Depth: .93 inches
  • Cradle Spine Height: 3.92 inches
  • Cradle Spine Width: 2.25 inches

NOTE: The top of the cradle is open allowing electronic devices to be taller than the height of the cradle. The cradle is designed to be used in a closed cabin environment. The side clamping cradle is only a light weight cradle and may not hold your device in a high vibration situations as found on a motorcycle/ATV.


RAM-B-102-UN3U shown above. Base mounting hardware not included.

NOTE: Screws must be drilled into a surface for the round base plate to be secured. Please check other mounts available from The Mount Depot if you are looking for a suction based or adhesive based cell phone mounts.

RAM-B-102-UN3U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black power coated marine grade aluminum. 
  • Socket Ball Size: B-Ball Size = 1.0 inch Ball. Maximum suggested weight 5 lbs. 
  • Base Plate: RAM-B-238U universal diamond plate with two holes measuring 1.9 inches from hole center to hole center.
  • Arm: RAM-B-201U standard length arm for 1 inch balls. The arm measures 2.875 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction. 
  • Adapter: RAM-B-238U universal diamond plate with two holes measuring 1.9 inches from hole center to hole center and accommodate the AMPS hole pattern.
  • Cradle/Holder: RAM-HOL-UN3U large side clamping cradle is designed to hold a large amount of different kinds of cell phones and electronic devices such as MP3s. This cradle has padded locking side clamps that close tightly on the item you want to hold. To release the clamp hold, simply press the button found at the bottom left side of the cradle which will spring the clamps open. At the base of the cradle are two small supports to hold the bottom of the item securely in the cradle. 

RAM-B-102-UN3U Options (NOT INCLUDED) Shown Below:

Cradle/Holders/Aqua Box (Not Included): Select another holder for Apple, cell phones, GPS systems and electronic devices by clicking here.

If you require a different sized side clamping cradle please click on the links below: 
Small Composite Side Clamping Cradle (RAM-HOL-UN1U)

ACCESSORIES FOR THIS PRODUCT...
Double Socket Arm Keyed Lock for RAM-B-201 Series with 1/4"-20 Brass Hole Double Socket SHORT Length Sized Arm for 1 Inch Ball (2.38 Inches Overall Length) Universal 2.5 Inch Round Aluminum Plate with 1 Inch Rubber Ball and 1/4"-20 Male Aluminum Camera Stud 2.5 Inch Diameter Base with Long Sized "C" Length Arm and Universal Diamond Plate
Price $29.49

Add Free Shipping
Price $16.99

Add Free Shipping
Price $14.99

Add Free Shipping
Price $41.99

Add Free Shipping
Double Socket Arm Keyed Lock for RAM-B-201 Series with 1/4"-20 Brass Hole Double Socket SHORT Length Sized Arm for 1 Inch Ball (2.38 Inches Overall Length) Universal 2.5 Inch Round Aluminum Plate with 1 Inch Rubber Ball and 1/4"-20 Male Aluminum Camera Stud 2.5 Inch Diameter Base with Long Sized "C" Length Arm and Universal Diamond Plate
Universal Finger Gripping Cradle (Fits Device Width 1.25" to 3.5" Including GPS, eTrex, 2 Way Radios, Smartphones with Cover/Case iPhone, Droid, etc.) Double Socket LONG Length Sized Arm for 1 Inch Ball (6.0 Inches Overall Length) 2.5 Inch Diameter Triple Magnetic Base for RAM-B-202 and RAM-202 2.43 Inch Diameter Self Adhesive Pad for RAM-B-202, RAM-202, RAP-SB-178, RAP-SB-180, etc.
Price $34.99

Add Free Shipping
Price $27.49

Add Free Shipping
Price $19.99

Add Free Shipping
Price $8.99

Add Free Shipping
Universal Finger Gripping Cradle (Fits Device Width 1.25" to 3.5" Including GPS, eTrex, 2 Way Radios, Smartphones with Cover/Case iPhone, Droid, etc.) Double Socket LONG Length Sized Arm for 1 Inch Ball (6.0 Inches Overall Length) 2.5 Inch Diameter Triple Magnetic Base for RAM-B-202 and RAM-202 2.43 Inch Diameter Self Adhesive Pad for RAM-B-202, RAM-202, RAP-SB-178, RAP-SB-180, etc.
Universal Small Sized Electronic Device Holder (Fits Device Width 1.5" to 2.5") Universal Electronic Finger Gripping Cradle (Bendix/King AV80R, Mio, Navman, Sony PSP, TomTom Go 930, etc.) Universal Top Clamping Quick Phone Cradle (Fits Device Height Range: 4.75" - 5.75", Width Range: 2.19" - 3.25", Max Depth: 0.72") 2.5 Inch Diameter Base with SHORT Sized "A" Length Arm and Universal Diamond Plate
Price $24.49

Add Free Shipping
Price $25.99

Add Free Shipping
Price $17.99

Add Free Shipping
Price $30.99

Add Free Shipping
Universal Small Sized Electronic Device Holder (Fits Device Width 1.5" to 2.5") Universal Electronic Finger Gripping Cradle (Bendix/King AV80R, Mio, Navman, Sony PSP, TomTom Go 930, etc.) Universal Top Clamping Quick Phone Cradle (Fits Device Height Range: 4.75" - 5.75", Width Range: 2.19" - 3.25", Max Depth: 0.72") 2.5 Inch Diameter Base with SHORT Sized "A" Length Arm and Universal Diamond Plate
RAM-A-CAN with Universal Base RAM-A-CAN Cup Holder Mount with Flexible Arm and Diamond Shaped Plate (for iPhone, GPS, Smartphone, etc.)
Price $18.99

Add Free Shipping
Price $39.99

Add Free Shipping
RAM-A-CAN with Universal Base RAM-A-CAN Cup Holder Mount with Flexible Arm and Diamond Shaped Plate (for iPhone, GPS, Smartphone, etc.)