Home > Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies (No Cradle) >

2.5 Inch Dia. Round Base with 1 Inch Diameter Ball and Standard Sized Length Arm (No Diamond Mounting Plate Adapter)
2.5 Inch Dia. Round Base with 1 Inch Diameter Ball and Standard Sized Length Arm (No Diamond Mounting Plate Adapter)
 
Alternative Views:


Price $25.49

STOCK STATUS: In Stock - Ships Next Bus. Day

Free Shipping
Product Code: RAM-B-103U
QTY:

DESCRIPTION
 
The RAM-B-103U is a flat surface marine grade aluminum mount that has a 2.5 inch round flat surface base with pre-drilled holes (hardware not included) and standard sized length arm.


RAM-B-103U shown above. Mounting hardware not included.

RAM-B-103U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black power coated marine grade aluminum. Chrome is available.
  • Overall Length: 4.0 inches
  • Socket Ball Size: B-Ball Size = 1.0 inch Ball. Maximum suggested weight 5 lbs. To see additional Ball Size options that accommodate heavier weight please see additional options listed below.
  • Base Plate: RAM-B-202U universal 2.5 inch round base with pre-drilled holes. Accommodate the AMPS hole pattern.
  • Arm: RAM-B-201U standard length arm for 1 inch balls. The arm measures 3.0 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction.
  • Adapter: Not Included.

RAM-B-201U Description: Black powder coated marine grade aluminum arm allows a 1 inch diameter ball accessory to be connected at either end. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.

RAM-B-201U Options (Not Included): The RAM-KNOB3LU shown below is a keyed lock and replaces the twist knob found on the RAM-B-201 series arm. This is a great option if you are using an Aqua Box and need extra security.


ACCESSORIES FOR THIS PRODUCT...
Universal Aluminum Diamond Plate with 1 Inch Ball Dia. Rubber Ball (AMPS Hole Compatible) 1/4"-20 Male Aluminum Camera Stud with 1 Inch Rubber Ball .38"-16 Male Thread Post with 1 Inch Ball Rail Base with Double Stainless Steel U-Bolts with 1 Inch Ball (Fits Rail Diameter .75 to 1.0 Inch)
Price $8.99

Add Free Shipping
Price $10.99

Add Free Shipping
Price $10.99

Add Free Shipping
Price $25.49

Add Free Shipping
Universal Aluminum Diamond Plate with 1 Inch Ball Dia. Rubber Ball (AMPS Hole Compatible) 1/4"-20 Male Aluminum Camera Stud with 1 Inch Rubber Ball .38"-16 Male Thread Post with 1 Inch Ball Rail Base with Double Stainless Steel U-Bolts with 1 Inch Ball (Fits Rail Diameter .75 to 1.0 Inch)
Universal 2.5 Inch Round Aluminum Plate with 1 Inch Rubber Ball and 1/4"-20 Male Aluminum Camera Stud Universal Small Sized Electronic Device Holder (Fits Device Width 1.5" to 2.5") Universal 2.5 Inch Round Aluminum Plate with 1 Inch Dia. Rubber Ball (AMPS Hole Compatible) Handlebar or Rail Base (Fits .5" to 1.25" Rail Diameter) with ZINC U-Bolt and 1 Inch Ball
Price $14.99

Add Free Shipping
Price $24.49

Add Free Shipping
Price $9.99

Add Free Shipping
Price $18.49

Add Free Shipping
Universal 2.5 Inch Round Aluminum Plate with 1 Inch Rubber Ball and 1/4"-20 Male Aluminum Camera Stud Universal Small Sized Electronic Device Holder (Fits Device Width 1.5" to 2.5") Universal 2.5 Inch Round Aluminum Plate with 1 Inch Dia. Rubber Ball (AMPS Hole Compatible) Handlebar or Rail Base (Fits .5" to 1.25" Rail Diameter) with ZINC U-Bolt and 1 Inch Ball
Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) Marine Grade Aluminum Base with 1.0 Inch Dia. Rubber Ball Universal X Grip Spring Loaded Holder with 1" B-Sized Ball (Fits Medium Sized Smartphones with Device Width from 1.875" to 3.25") RAM-HOL-UN5U Universal Large Sized (Fits Device Width 1.75" to 3.5") Spring Loaded Clamping Holder with Rubber Bumpers (Fits Most Smartphones with Cover/Case iPhone, Droid, etc.)
Price $31.49

Add Free Shipping
Price $33.99

Add Free Shipping
Price $14.99

Add Free Shipping
Aviation Yoke "C" Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) Marine Grade Aluminum Base with 1.0 Inch Dia. Rubber Ball Universal X Grip Spring Loaded Holder with 1" B-Sized Ball (Fits Medium Sized Smartphones with Device Width from 1.875" to 3.25") RAM-HOL-UN5U Universal Large Sized (Fits Device Width 1.75" to 3.5") Spring Loaded Clamping Holder with Rubber Bumpers (Fits Most Smartphones with Cover/Case iPhone, Droid, etc.)


Browse for more products in the same category as this item:

Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies (No Cradle)
RAM Assemblies & Parts > B Ball = 1.0" Ball Assemblies & Parts / Max. Weight 5 lbs. > 1.0" B Ball Assemblies > Flat Surface Assemblies
Tablet Holders & Mounts > Universal Mounting Kits for Tablets (Tablet Cradle Not Included)