Home > Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies with Cradle (Apple, Garmin, GPS, Tablets, Video Camera, etc.) > Apple >

Aviation Yoke Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) with Standard Sized Arm and RAM-HOL-TAB11U Docking Connector Holder for Apple iPad Mini (1st Gen) WITHOUT Case or Cover
Aviation Yoke Clamp Base (Accommodates 0.625" to 1.25" Rail Diameter) with Standard Sized Arm and RAM-HOL-TAB11U Docking Connector Holder for Apple iPad Mini (1st Gen) WITHOUT Case or Cover
 
Alternative Views:


Price: $126.49

STOCK STATUS: Out of Stock - Email for ETA

Free Shipping
Product Code: RAM-B-121-TAB11U
QTY:

DESCRIPTION
 
The RAM-B-121-TAB11U is a marine grade aluminum yoke mount that consists of the RAM-B-121-238U assembly (yoke clamp mount base, standard sized length arm and universal diamond plate) and docking connector holder for the following devices:
  • Apple iPad Mini (1st Gen) WITHOUT Case, Cover or Skin
  • This cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
  • Cradle Dimensions:
    • Height: 6.80" minimum to 9" maximum
    • Width: Maximum width to 5.31"
    • Depth: 0.125" minimum to 0.56" maximum

RAM-B-121-TAB11U shown above

RAM-B-121-TAB11U Includes the Following:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Color/Material: Black power coated marine grade aluminum. 
  • Socket Ball Size: B-Ball Size = 1.0 inch Ball. Maximum suggested weight 5 lbs.
  • RAM-B-121-AP11U includes the RAM-B-121-238U (shown below). The RAM-B-121-238U consists of the RAM-B-121BU (accommodates a rail diameter from 0.625" to 1.25"), RAM-B-201U and RAM-B-238U.
    NOTE: Picture, far left, below shows a diamond plate adapter versus the included RAM-B-202U adapter for illustration purposes.
  • Yoke Base: RAM-B-121BU aluminum yoke clamp mount base fits a rail diameter from 5/8 inch to a maximum of 1.25 inches. The 1 inch rubber ball sits at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the yoke clamps around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails. The rail does not need to be perfectly round to use this base.
  • Arm: RAM-B-201U standard length arm for 1 inch balls. The arm measures 2.875 inches between socket centers (3.6875 inches in overall length). A plastic twist knob allows you to articulate the arm in any direction. 
  • Adapter: RAM-B-238U universal diameter shaped adapter plate with pre-drilled holes that accommodates the AMPS hole pattern.
  • Cradle: RAM-HOL-TAB11U high strength plastic holder for the devices specified above. 
  • Cradle Features:
1. Support cups contain open slots to accommodate for tablets of various sizes.
2. Unique design enables the use of the factory iPad Mini charging cable (not included) and docking connector.
3. Quickly dock and undock your iPad Mini without requiring the insertion and removal of the charging cable.
4. Back plate can support various size support cups.
5. Spring loaded tension provides secure support for your tablet.
6. Spring loaded cradle allows for quick release of your tablet.
7. Full access to all iPad Mini ports.
  • Manufacturer's Description: The RAM-HOL-TAB11U consists of a spring loaded back plate, custom support cups and Uni-Conn docking connector. This spring loaded design makes it easy to load and unload your tablet Tab, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your iPad mini can be used just as it was intended. The Uni-Conn features a unique patent pending design which enables the use of the factory iPad cables with docking connector for charging as well as other functions.


Browse for more products in the same category as this item:

Flat Surface Mounts > B-Ball = 1.0" Ball Mounts & Parts / Max. Weight 5 lbs. > Flat Surface Assemblies with Cradle (Apple, Garmin, GPS, Tablets, Video Camera, etc.) > Apple
Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Flat Surface RAM-B-138 Assemblies
Aviation and Yoke Mounts > Aviation Assemblies with Cradle (Apple, Garmin, GPS, Smartphone, Tablet, Universal, etc.) > Yoke Mount Assemblies (Fits .5" to 2.58" Rail Diameter) > Aluminum Yoke Assemblies RAM-B-121 Series Assemblies (Fits 0.625" to 1.25" Rail Diameter) > Apple Assemblies