The RAM-B-152 is a flat surface spotlight assembly with a 2.5 inch diameter base and standard length arm. The assembly consists of the RAM-B-152B Spotlight Bulb PAR 36 9W, RAM-B-201U arm and RAM-B-202U base.
Click here to see all spotlight assemblies.
RAM-B-152 shown above. Base mounting hardware is not included.
Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty (not including LED bulb). Material: Black powder coated marine grade aluminum with high strength composite spotlight.
RAM-B-152B Spotlight Specs:
- PAR36
- 12 Volts DC
- 9 Watts
- 1900 Lumens
- Sealed Beam
- 30-Degree Spot Light
- Frosted Lens
RAM-B-201U Arm Description: The marine grade aluminum double socket arm for 1 inch balls is the standard 2.875 inch double socket arm length. The RAM-B-201U has a socket at either end to allow a 1 inch diameter ball accessories to be connected. A tightening screw on the side of the arm enables the sockets to clamp firmly to a RAM 1 inch diameter ball. When loosening the side screw, a single spring inside the arm opens the sockets allowing you to pivot the ball and socket connection or completely disconnect the ball from the socket. The arm length is 2.875 inches when measured from socket center to socket center. The total length of the arm is 3.6875 inches.
RAM-B-202U Base Description: The RAM-B-202U is a marine grade aluminum 2.5 inch diameter plate with 1 inch rubber ball. The plate has pre-drilled holes and is compatible with the AMPS hole pattern. Mounting hardware IS NOT INCLUDED.
