RAM-B-174-366 RAM Mount Motorcycle Mount with Camera Adapter

The RAM-B-174-366 is a marine grade aluminum brake/clutch assembly (includes hardware) or motorcycle handlebar base (zinc u-bolts fits .5 to 1.25 inch rail diameter), standard sized length arm and 1/4"-20 male camera thread with 1 inch diameter rubber ball.

RAM-B-174-366 shown above.

RAM-B-174-366 Manufacturer Included Features:
NOTE: Manufacturer features and specifications can change without notice. Please visit the manufacturer's website for the latest product information.

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Click on individual links to view more information.
Included Base: RAM-B-309-7U black powder coated marine grade aluminum brake/clutch assembly or motorcycle handlebar base with 1 inch diameter rubber ball. Fits either left or right side of the brake/clutch assembly or handlebar rail.
- Brake/Clutch Hardware Description:
  - Two hole centers in the base have a minimum width of 0.94 inches and maximum of 1.58 inches.
  - Includes Two 6mm X 55mm Machine Screws.
  - Includes Two 1/4''-20 X 2 Inch Long Machine Screws.
  - Includes Two 1/4'' Lock Washers and Two Rubber Caps.
- Handlebar or Rail Mount Hardware Description:
  - Includes RAM-HAR-SU251Z Zinc U-Bolt Hardware Pack for .5 to 1.25 inch rail diameter.
  - Includes One 1 Inch Zinc U-bolt.
  - Includes One 1.25 Inch Zinc U-bolt.
  - Includes two nuts, u-bolt plastic caps and the RAP-319 composite reducer that allows a rail diameter down to .5 inch when used with the 1 inch zinc u-bolt.
Optional Stainless Steel U-bolts:
- RAM-HAR-SU251 1.0 inch stainless steel u-bolt, is available.
- RAM-SU2512U 1.25 inch stainless steel u-bolt, is available.
Included Arm: RAM-B-201U black powder coated marine grade aluminum standard sized length arm for 1 inch balls.
- Measures 3.0 inches between socket centers.
- Measures 3.6875 inches in overall total length.
- The arm allows for easy adjustment by loosening the plastic side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached base accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.
Included Camera Plate: RAP-B-366U is a 1 inch diameter ball with male 1/4"-20 camera thread. This thread fits the female threads found on the bottom of most cameras.

themountdepot.com

VEHICLE LAPTOP MOUNTS

Mounts by Application

.