RAM-B-176-237U RAM Mount Fork Stem Mount w Video Camera Adapter

The RAM-B-176-237U is a fork stem motorcycle base (see fork stem opening requirements below), standard sized length arm and 1/4"-20 male camera thread with 1 inch diameter rubber ball.

RAM-B-176-237U shown above.

RAM-B-176-237U Manufacturer Included Features:
NOTE: Manufacturer features and specifications can change without notice. Please visit the manufacturer's website for the latest product information.

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Click on individual links to view more product information.
Included Base: RAM-B-342U fork stem mount is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit.
- This part is designed to fit into the cylindrical bore wall of fork stems and WILL WORK with stems that measure from 12 - 20mm and 28mm or .5 inch – 1.10 inch at the following intervals:
- Metric Standard
  12mm .5”
  14mm .55”
  16mm .63”
  18mm .71”
  20mm .79”
  28mm 1.10”
- 1 inch diameter rubber ball is attached to the fork stem base.
- Click here to see installation instructions for the RAM-B-342.
Included Arm: RAM-B-201U black powder coated marine grade aluminum standard sized length arm for 1 inch balls.
- Measures 2.875 inches between socket centers.
- Measures 3.6875 inches in overall total length.
- The arm allows for easy adjustment by loosening the plastic side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached base accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.
- Optional Arms:
  - RAM-B-201U-A 1.75 inches from socket center to socket center is available.
  - RAM-B-201U-C 5.25 inches from socket center to socket center is available.
Included Camera Plate: RAM-B-237U is a 1 inch diameter rubber ball with 1/4"-20 male camera thread. This thread fits the female threads found on the bottom of most cameras.
Additional Cradle/ Holders/ Aqua Box: Click here to see additional cradles that can be purchased for the RAM-B-176 series including: Apple, cell, GPS and waterproof aqua boxes with soft touch flex lens.
OPTIONAL ACCESSORIES: Click on the Product Options tab above including self leveling cup holders, waterproof aqua boxes with soft touch flex lens, screen magnifiers, locking knobs, video camera adapters and more!

Popular options compatible with the RAM-B-176 series below.

Below are popular accessories compatible with the RAM-B-176 series. Click on the links below for more detailed information.

Cradle / Holders: Select a holder for Apple, cell phones, GPS systems and other electronic devices by clicking here. All are compatible with the RAM-B-176 series and attach to the optional RAM-B-238U diamond plate.

1 Inch Ball and Video Camera Adapters:
- 1 inch ball adapters attach to the RAM-B-201 series arm.
- RAM-B-202AU 2.5 inch round plate with 1/4"-20 aluminum stud.
- Click here to see all 1 inch ball adapters.

Waterproof Aqua Boxes: Waterproof Aqua Boxes with soft touch flex lens allows the touch screen of electronic devices such as iPhone or GPS devices to remain operational.
- Knock-out hole allows cables to be run through the back of the aqua box.
- The electronic device sits in the aqua box using included foam inserts. The RAM-HOL-xxxx cradle is not needed to secure the electronic device in the aqua box. Padlock not included.
- Can be mounted in the vertical or horizontal position.
- Attaches directly to the optional RAM-B-202U.

Self Leveling Cup Holder: All Motorcycle Cup Holders
Includes foam insert and 1 inch rubber ball.
RAM-B-132-342U can be purchased as a complete kit and mounted on the opposite side of the handlebar.
RAM-B-132BU cup holder only. Attaches directly to the RAM-B-201U arm.

Keyed Twist Lock Knob: RAM-KNOB-3LU replaces the plastic twist knob on the RAM-B-201 series arm. Provides extra security for directly mounted applications such as aqua boxes.
Screen Magnifier: The RAM-MAG-1U is a screen magnifier that is 2 inches by 4 inches with a 2x zoom. Connects between the optional cradle and RAM-B-238U.

Portability: The RAP-326 quick release adapter allows the cradle to be easily removed and moved to another mounting device without tools.
- Perfect for sharing electronic device between applications (i.e. motorcycle Garmin GPS device moved to automobile suction cup mount).
- Includes RAP-326FU female and RAP-326MU male adapters.
- Quick release allows the electronic device to stay attached in the cradle while quickly being disconnected from the RAM-B-238U. Cradle can then be re-attached to another mounting application that also has the RAM-B-238U.
- Requires the RAP-326MU male adapter for the second application being attached too. The RAP-326FU mates to the RAP-326MU and the RAP-326MU mates to the RAM-B-238U.

themountdepot.com

VEHICLE LAPTOP MOUNTS

Mounts by Application

.