Home > iPad Assemblies > iPad (1st Gen) Assemblies >

Dual 3.25" Dia. ARTICULATING Suction Cup Base w/ Twist Lock, Short Sized Arm & RAM-HOL-UN9U Universal X-Grip Holder Fits Most 9-10" Tablets (Fits Device Width 6.25" to 8.1")
Dual 3.25" Dia. ARTICULATING Suction Cup Base w/ Twist Lock, Short Sized Arm & RAM-HOL-UN9U Universal X-Grip Holder Fits Most 9-10" Tablets (Fits Device Width 6.25" to 8.1")
 
Alternative Views:
Price $174.49

STOCK STATUS: In Stock - Ships Next Bus. Day

Free Shipping
Product Code: RAM-B-189-PIV1-A-UN9U
QTY:

DESCRIPTION
 
The RAM-B-189-PIV1-A-UN9U consists of a double articulating 3.25 inch twist lock suction cup base, short sized double socket length arm, round base adapter and universal X-Grip III cradle that fits most 10 inch screen tablets. The double suction cup base is designed to have an "EXTRA STRONG" hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.

The RAM-HOL-UN9U X Grip III universal LARGE high strength composite spring loaded holder with expandable grip arms is designed to fit MOST 10 inch screen tablets including the following devices:
  • Apple Air, Air 2
  • Apple iPad 2
  • Apple iPad 3
  • Apple iPad HD, iPad4 with lightning connector
  • Asus EEE Pad
  • Asus Eee Pad Transformer
  • HP TouchPad
  • Lenovo LePad Slate
  • LG G-Slate
  • LG Optimus Pad
  • Microsoft Surface
  • Motorola XOOM
  • Motorola XOOM 2
  • Pandigital R90A200
  • Samsung Galaxy Tab 1, Tab 2, Tab 3 10.1 and 10.1 2014 edition
  • Toshiba Thrive
  • Most 10 inch screen tablets that maintain the following dimensions below:
    • Minimum Width = 6.25 inches
    • Maximum Width = 8.1 inches
    • Depth = 0.875 inches

NOTE: As the manufacturer adds new models this cradle may fit additional models not listed above. Contact or email us by clicking here.

NOTE: It's VERY IMPORTANT to verify the dimensions of your tablet with or without a sleeve/case when determining the overall size.


RAM-B-189-PIV1-A-UN9U shown above.

RAM-B-189-PIV1-A-UN9U Manufacturer Included Features:
NOTE: Manufacturer features can change without notice. Please visit the manufacturer's website for the latest product information.
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Base: Includes the RAM-B-189B-PIV1U dual articulating suction cup base with 3.25 inch twist lock suction cup bases.
  • Arm: Includes the RAM-B-201U-A 1 inch socket marine grade aluminum short sized length arm. Measures 2 inches between socket center and 2.38 inches in overall length.
  • Adapter: Includes the RAM-B-202U 2.5 inch diameter base with 1 inch diameter rubber ball. Attaches to the double socket arm and holder.
  • RAM-HOL-UN9U X Grip III Holder Features:
    • Spring loaded holder expands and contracts for perfect fit of your tablet.
    • Rubber coated tips will hold your tablet firm and stable.
    • Socket technology allows for multiple adjustment angles and articulation of your tablet.
    • Easy access grip knobs, located on the back of the holder for quick release of your tablet.
    • Multiple mounting access points on the back of the holder
    • Additional support keeper at the bottom of the holder.
    • Will not interfere with electronic ports, speakers and camera.
  • X Grip III Holder Dimensions:
    • Minimum Width = 6.25 inches
    • Maximum Width = 8.1 inches
    • Depth = 0.875 inches
  • Manufacturer's Description: The new RAM X-Grip III line of products just got bigger and better. This new model is just what you've been looking for to hold your favorite tablet. Just like the devices it was made for, it is everything you need and nothing you don't. Simple to open and close, the spring loaded RAM X-Grip III leaves the outside edge of your tablet almost completely free of annoying obstructions. Soft rubber fingers apply just enough force to keep your tablet in safe and secure. Compatible with a wide range of mounting solutions, your tablet is sure to find a home no matter where your travels take you.

The RAM-HOL-UN9U consists of a composite spring loaded holder, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN9U expands and contracts for perfect fit of most 10 inch tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip III.

Instructions

ACCESSORIES FOR THIS PRODUCT...
X-Grip Universal Holder for 7"-8" Tablets with 1" Ball (Fits Device Width 2.5" to 5.75") Double Socket LONG Length Sized Arm for 1 Inch Ball (6.0 Inches Overall Length) RAM-HOL-UN11U Universal X-Grip Holder Fits Most 12" Tablets (Fits Device Width 7.25" to 8.75")
Price $47.49

Add Free Shipping
Price $27.49

Add Free Shipping
Price $94.49

Add Free Shipping
X-Grip Universal Holder for 7"-8" Tablets with 1" Ball (Fits Device Width 2.5" to 5.75") Double Socket LONG Length Sized Arm for 1 Inch Ball (6.0 Inches Overall Length) RAM-HOL-UN11U Universal X-Grip Holder Fits Most 12" Tablets (Fits Device Width 7.25" to 8.75")


Browse for more products in the same category as this item:

iPad Assemblies > iPad (1st Gen) Assemblies
iPad Assemblies > iPad 2 (2nd Gen) & iPad 3 HD, iPad 4 Assemblies
Suction Cup Mounts > Suction Cup Tablet Assemblies (iPad, Galaxy, Surface Pro, etc)