themountdepot.com

NOTE: Base and mounting plate hardware is not included. 

RAM-D-101U-246 Features:

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
• Material: Black powder coated marine grade aluminum.
• Socket Ball Size: Connects to 2.25 inch D Ball Size / Max. Weight 15 lbs.
• Base Plate Included: RAM-D-202U shown below is included. The RAM-D-202U is a universal marine grade aluminum 3.68 inch diameter plate with aluminum post and a 2.25 inch diameter rubber D sized ball. The plate has pre-drilled holes. Three holes are the standard RAM pattern located 120 degrees apart plus one extra hole in between.

    

• Arm Included: RAM-D-201U shown below is the standard length marine grade aluminum arm 6.5635 inches in length from socket center to socket center and 8.375 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
  

    

• VESA Plate Included: RAM-D-246U shown below is a VESA 75/100mm compatible standard plate. The plate consists of a 2.25 inch diameter rubber ball connected to a 4.75 inch square plate with aluminum post and 4x75mm and 4x100mm holes in each corner.