RAM-D-101U-C-243 RAM Mount D Sized Flat Surface Mount & 1/2 Sized VESA Plate

The RAM-D-101U-C-243 is a marine grade aluminum flat surface VESA mount with a 3.68 inch diameter base plate, SHORT length arm and 2.75 x 5 inch VESA mounting plate. Both base and mounting plates have pre-drilled holes.

RAM-D-101U-C-243 Features:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Material: Black powder coated marine grade aluminum.
Socket Ball Size: Connects to 2.25 inch D Ball Size / Max. Weight 15 lbs.
Base Plate Included: RAM-D-202U shown below is included. The RAM-D-202U is a universal marine grade aluminum 3.68 inch diameter plate with a 2.25 inch diameter rubber D sized ball. The plate has pre-drilled holes. Three holes are the standard RAM pattern located 120 degrees apart plus one extra hole in between.

Arm Included: RAM-D-201U-C shown below is the short length marine grade aluminum arm 3.1875 inches in length from socket center to socket center and 5.0625 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!

Mounting Plate Included: RAM-D-243U shown below is included. The RAM-D-243U is a marine grade aluminum 2.75 x 5 inch half VESA plate with a 2.25 inch diameter rubber D sized ball. The plate has pre-drilled holes.

themountdepot.com

VEHICLE LAPTOP MOUNTS

Mounts by Application

.