themountdepot.com

NOTE: Base mounting hardware is not included. 

RAM-E-111U Features and Options:

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
• Material: Black powder coated marine grade aluminum with metal twist knob.
• NOTE: This marine grade aluminum plate can also be drilled into for a custom hole pattern.
• Ball Size: RAM "E" sized 3.38 inch diameter rubber ball. Maximum suggested weight 20 lbs.
• Overall Height: Overall height is 19 inches at maximum extension.
  
• Mounting Plate Dimensions: 11 inch x 3 inch plate with a 3.38 inch diameter rubber "E" sized ball. 
• Mounting Plate Description: RAM-E-111BU has many different combination of pre-drilled holes which will match many electronic devices.
  
  

• Arm Included: RAM-E-201U shown below is the standard sized length arm for RAM-E-201 arms. The marine grade aluminum arm is 6.5635 inches in length from socket center to socket center and 8.375 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
  

    

• Base Plate Included: RAM-E-202U shown below is a marine grade aluminum universal is a 3.68 inch round marine grade aluminum universal plate with a 3.38 inch diameter rubber ball.

    

• Arm Length Options (NOT INCLUDED):
  • RAM-E-201U-D short "D" length arm 4.375 inches from socket center to socket center (7.25 inches in overall length) shown below is available.