Home > Lift Truck / Forklift Mounts > Lift Truck / Forklift Complete Assemblies (VESA & Scanner Gun Assemblies, etc.) > Extreme Duty "E" Ball Assemblies = 3.38" Ball Mounts / Max Weight 20 lbs. >

Back-Up Mounting Plate with Standard Sized "E" Length Arm and Two VESA Plates
Back-Up Mounting Plate with Standard Sized "E" Length Arm and Two VESA Plates
 
Price $156.95

STOCK STATUS: In Stock - Ships Next Bus. Day

Free Shipping
Product Code: RAM-E-246-335
QTY:

DESCRIPTION TECHNICAL SPECS
 
The RAM-E-246-335 is a lift truck back-up mounting plate that includes the mounting plate with 3.38 inch diameter rubber ball, standard sized "E" length arm and VESA mounting plate with 4x75mm and 4x100mm hole pattern.

RAM-E-246-335 shown above.

NOTE: Mounting hardware to the forklift is not included. 

RAM-E-246-335 Features and Options:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Forklift Mount Plate Material: The RAM-335 is black powder coated steel.
  • Forklift Plate Capacity: Maximum suggested weight 20 lbs.
  • Forklift Plate Description: RAM-335 shown below has many different combination of pre-drilled holes which will match many electronic devices.
   
NOTE: RAM-335 mounting plate show above with included RAM-E-246 plate with 3.38 inch diameter ball.
  • Manufacturer's Description: Sometimes the simplest solution makes the most sense. The new RAM Lift Truck Back-Up Mounting Plate is the ideal way to get a RAM ball attached to most any lift cage or overhead guard.
  • Installation: Installation is as easy as attaching the base with ball to one of the plates and then sandwiching the guard or cage between the two mounting plates using the hardware provided.
  • Arm Included: RAM-E-201U shown below is the standard sized "E" sized length arm. Black powder coated marine grade aluminum arm is 9.875 inches in length from socket center to socket center and 12.625 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!  

  • VESA Plates Included: Two black powder coated marine grade aluminum  RAM-E-246U are included with this kit. The 4.75 inch square plate has a 4x75mm and 4x100mm hole pattern with pre-drilled holes and 3.38 inch diameter rubber ball. One RAM-E-246 attaches to the RAM-335 forklift mounting plate. The other VESA plate attaches to the electronic device.
          



Browse for more products in the same category as this item:

Lift Truck / Forklift Mounts > Lift Truck / Forklift Complete Assemblies (VESA & Scanner Gun Assemblies, etc.) > Extreme Duty "E" Ball Assemblies = 3.38" Ball Mounts / Max Weight 20 lbs.
RAM Assemblies & Parts > E Ball = 3.38" Ball Assemblies & Parts / Max. Weight 20 lbs. > 3.38" E Ball Sized Assemblies
RAM Assemblies & Parts > VESA Plates and Mounts > E Ball = 3.38" Ball VESA Mounts