themountdepot.com

NOTE: It's VERY IMPORTANT to verify the dimensions of your tablet with or without a sleeve/case when determining the overall size.


RAM-HOL-TAB-LGU shown above.

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
• Cradle Material: Black high strength composite.
• Cradle Hole Pattern: The back of the cradle has four pre-drilled holes compatible with the AMPS hole pattern (1.912 inches from center hole to center hole).
• Cradle Features:

1. Support cups contain open slots to accommodate for devices with or without bumpers/cases sleeves.
2. Back plate can support various size support cups.
3. Spring loaded tension provides secure support of device.
4. Spring loaded cradle allows for quick release of device.
5. The cradle allows all cables (NOT INCLUDED) to stay connected and all buttons/ports remain accessible.

• Using Small Cup Ends - Fits Tablets within:
  • Height: 8.5" minimum to 11.125" maximum
  • Width: Maximum to 7.75"
  • Edge Depth: Maximum to 0.56"
  
  
• Small Large Cup Ends - Fits Tablets within:
  • Height: 9.5" minimum to 11.75" maximum
  • Width: Maximum to 8.25"
  • Edge Depth: Maximum to 1.10"
  
  
• Included with Cradle:
  
  • (1) Spring loaded back plate
  • (2) Support cups for thin tablets
  • (2) Support cups for wide tablets
  • Hardware to attach to Optional cradle adapter.
    
• Optional Cradle Adapter: The OPTIONAL RAM-B-202U is a universal round shaped adapter plate with pre-drilled holes (compatible with the AMPS hole pattern) that attaches to the back of the cradle. The RAM-B-202U has a 1 inch rubber ball that will connect to other RAM 1 inch socket accessories (i.e. RAM-B-201 series arm, etc).

• Manufacturer's Cradle Description: Get the most out of your tablet with the Universal Tab-Tite cradle. With 2 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications.
• Fits the following devices:
• 10" Tablets with LifeProof nd cases
• 10" Tablets with Lifedge cases
• 10" Tablets with Heavy duty cases
• Apple iPad 4 (With Lightning Connector)
• Apple iPad 3
• Apple iPad 2
• Apple iPad 1