RAM-HOL-TAB-SM2U RAM Mount Tablet Cradle for Galaxy Tab 4 8.0, Galaxy Tab S 8.4, Galaxy Tab E 8.0, Galaxy Tab Active2

Now that you’ve got the right tablet for the job, you are going to need the right mounting system. Get the most out of your tablet with the Universal RAM Tab-Tite cradle. With 3 sets of interchangeable end cups, ranging from different sizes and features, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. The end cups are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below.

Height Range: 8.08" - 11"
Width Range: 3.77" - 5.88"
Depth Range: .13" - .67"

NOTE: It's VERY IMPORTANT to verify the dimensions of your tablet with or without a sleeve/case when determining the overall size.

RAM-HOL-TAB-SM2U Features:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Cradle Material: Black high strength composite.
Cradle Hole Pattern: The back of the cradle has pre-drilled holes compatible with the AMPS hole pattern.
Cradle Features:
1. Support cups contain open slots to accommodate for devices with or without bumpers/cases sleeves.
2. Back plate can support various size support cups.
3. Spring loaded tension provides secure support of device.
4. Spring loaded cradle allows for quick release of device.
5. The cradle allows all cables (NOT INCLUDED) to stay connected and all buttons/ports remain accessible.
Cradle Dimensions with Large Cup Ends:
- Height: 8.25" minimum to 11.0" maximum
- Width: 5.0" minimum to 5.88" maximum
- Depth: 0.3" to 0.67" Maximum
Cradle Dimensions with Small Cup Ends:
- Height: 8.08" minimum to 10.69" maximum
- Width: 3.77" mimimum to 4.96" maximum
- Depth: 0.13" to .36" Maximum
Cradle Dimensions with Medium Cup Ends:
- Height: 8.32" minimum to 10.92" maximum
- Width: 4.43 minimum to 5.3" maximum
- Depth: 0.13" to 0.62" Maximum
Included with Cradle:
- (1) Spring loaded back plate
- Includes a set of nuts and bolts to connect to the OPTIONAL RAM-B-202U round shaped adapter plate.
Optional Cradle Adapter: The OPTIONAL RAM-B-202U is a universal round shaped adapter plate with pre-drilled holes (compatible with the AMPS hole pattern) that attaches to the back of the cradle. The RAM-B-202U has a 1 inch rubber ball that will connect to other RAM 1 inch socket accessories (i.e. RAM-B-201 series arm, etc).

Example compatible devcies:
Galaxy Tab 4 8.0 with Otterbox Defender Case
Galaxy Tab S 8.4 with Otterbox Defender Case
Galaxy Tab E 8.0 with Verizon Rugged Case
Galaxy Tab Active2

themountdepot.com

VEHICLE LAPTOP MOUNTS

Mounts by Application

.