Home > Laptop Accessories > Replacement Vehicle Bases >

Chevrolet: Camaro (1993-2002) and Caprice (1993-2002), Ford Crown Victoria Police Interceptor (1991-2011), Lincoln Town Car (2005-2010) Vehicle Base
Chevrolet: Camaro (1993-2002) and Caprice (1993-2002), Ford Crown Victoria Police Interceptor (1991-2011), Lincoln Town Car (2005-2010) Vehicle Base
 
Price $76.99

STOCK STATUS: Out of Stock - Email for ETA

Free Shipping
Product Code: RAM-VB-117
QTY:

DESCRIPTION
 
RAM-VB-117 laptop vehicle base for the following vehicles:
  • Chevrolet Camaro (1993-2002)
  • Chevrolet Caprice (1990-1995)
  • Ford Crown Victoria Police Interceptor (1991-2011)
  • Lincoln Town Car (2005-2010)
NOTE: As auto manufacturers redesign vehicle models this base may or may not fit additional models. If you do not see your vehicle listed contact us or complete the product inquiry form by clicking here.
NOTE: Click here for Airbag Safety and RAM Mounting Systems. 
NOTE: See the RAM-VB-117-SW1 complete laptop system by clicking here.
 
RAM-VB-117 Manufacturer Specifications:
NOTE: Manufacturer specifications can change without notice.
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Material: Black powder coated steel.
  • Seat Configuration: Bucket, Bench, 60-40 Split seat.
  • Installation: No-drill installation. Attaches to existing seat studs.
  • Mount/Base Placement: Passenger side on the floor, under seat. 
    • NOTE: Vehicle base will limit seat travel.
  • Vehicle Base Dimensions:
    • Dimension A: 17.57 inches
    • Dimension B: 8.5 inches
    • Dimension C: 11.0 inches
    • Center to Center Hole Seat Bolt Distance: 6.38 inches
    • NOTE: Center to Center Hole Seat Bolt Distance is the center hole distance of the two pre-drilled holes in the vehicle base that line up with the vehicle seat bolts. This distance MUST MATCH your vehicle.

                  

RAM VB-117 Popular Tough Tray Options (NOT INCLUDED) Shown Below:
Options including screen supports (keeps computer screen locked in position, most popular option), flat side arms (allows computer lid to close flat while in the Tough Tray), power caddy (holds power supplies), Secure-N-Motion kit (recommended by RAM when laptops are secured in the Tough Tray while driving), USB computer light, printer mounts (Canon, Epson, HP, etc) and more! Click the links below to learn more.
  • Click here to view Tough Tray Accessories (i.e. Screen Support).
  • Click here to view Tele-Pole acceesories (i.e. Remove-A-Pole).
  • Click here to view all printer mounts.
  • Click here to view all laptop accessories.
Instructions
  • Click here to view the RAM Mount Vehicle Laptop installation video.
  • NOTE: If your vehicle is equipped with an airbag sensor under the seat disconnect the sensor before installing the vehicle base. (If unsure contact your local car dealer.) The video shown is for installation reference and may show additional or less parts than your vehicle base (RAM stabilizer foot that attaches to the base/lower tele-pole as shown in the video). Simply follow the video without installing these components if your vehicle base does not include these parts. Your vehicle base may connect to the seat track bolts differently than shown in the video. The instructions shown to install the RAM tele-pole system, swing arm assembly and Tough Tray are the same for all RAM No-Drill laptop systems regardless of the vehicle base used.
  • NOTE: Click here to view Airbag Safety and RAM Mounting Systems (Adobe required).


Browse for more products in the same category as this item:

Laptop Accessories > Replacement Vehicle Bases