RAM-VB-139-SW1 RAM Laptop Mount for Honda Accord

Click on the tabs directly above for Technical Specs and Product Options.

FREE DOMESTIC GROUND SHIPPING AND LAPTOP ACCESSORY!

RAM-VB-139-SW1 laptop vehicle mount system for the following vehicles:

HONDA ACCORD (2004-2007)

NOTE: As auto manufacturers redesign vehicle models this system may or may not fit additional models. If you do not see your vehicle listed contact us or complete the product inquiry form by clicking here.

NOTE: Click here for Airbag Safety and RAM Mounting Systems.

NOTE: For the vehicle base only see the RAM-VB-139 by clicking here.

Special Vehicle Requirements: Bucket seats only.

RAM-VB-139-SW1 Manufacturer Included Components (From Tray to Base):

NOTE: Manufacturer components can change without notice.

NOTE: Click the links below for pictures and detailed part information.

Tough Tray: RAM-234-3 spring loaded expandable tray. Accommodates laptops from 10-16 inches wide (screen sizes up to 17 inches).
NOTE: RAM Mounts Recommends the optional RAM-234-SNMU Secure-N-Motion kit if the Tough-Tray is intended to hold a laptop or device while the vehicle is in motion.
NOTE: The RAM-234-6 fits smaller devices and can be substituted.
Swing Arm: RAM-VB-110-1U dual swing arms provide 12 inches of total horizontal extension.
Upper Tele-Pole: RAM-VP-TTM8U 8 inch male upper tele-pole.
Lower Tele-Pole: RAM-VB-TBF9U 9 inch female lower tele-pole.
NOTE: Tele-poles feature a telescoping vertical height adjustment range from 12 to 18 inches.
Vehicle Base: RAM-VB-139 no-drill base for the specified vehicles.

RAM-VB-139-SW1 Manufacturer Specifications:

NOTE: Manufacturer specifications can change without notice.

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Material: Black powder coated steel with composite Tough Tray.
Seat Configuration: Bucket seats only. Call/email about bench seats.
Installation: No-drill installation. Attaches to existing seat studs.
Mount/Base Placement: Passenger side, front, where seat rail frame attaches to floor board.
- NOTE: Vehicle base will limit seat travel.
Vehicle Base Quick Disconnect: Optional. See RAM-VB-REM1 below.
Vehicle Base Dimensions:
- Dimension A: 14.5 inches
- Dimension B: 3.75 inches
- Dimension C: 5.5 inches
- Dimension D: 8.5 inches
- Center to Center Hole Seat Bolt Distance: 23.13 inches
- NOTE: Center to Center Hole Seat Bolt Distance is the center hole distance of the two pre-drilled holes in the vehicle base that line up with the vehicle seat bolts. This distance MUST MATCH your vehicle.

RAM-VB-139 Vehicle Base Options (NOT INCLUDED) Shown Below:

RAM-VB-REM1 attaches to the vehicle base. This Remove-A-Pole quick disconnect allows the entire laptop system from the vehicle base up to be removed using the quick release pin, no tools required! Perfect for individuals using a vehicle for work and personal use. One of our most popular options.

RAM-VB-ADJ1 attaches to the vehicle base. This Adjust-A-Pole allows additional adjustment of the tele-pole system away from seats or center consoles and also provides additional height. Can be used with the RAM-VB-REM1 remove a pole.

RAM VB-139-SW1 Popular Tough Tray Options (NOT INCLUDED) Shown Below:

Options including screen supports (keeps computer screen locked in position, most popular option), flat side arms (allows computer lid to close flat while in the Tough Tray), power caddy (holds power supplies), Secure-N-Motion kit (recommended by RAM when laptops are secured in the Tough Tray while driving), USB computer light, printer mounts (Canon, Epson, HP, etc) and more! Click the links below to learn more.

Click here to view Tough Tray accessories (i.e. Screen Support).
Click here to view Tele-Pole accessories (i.e. Remove-A-Pole).
Click here to view all printer mounts.
Click here to view all laptop accessories.

Below are manufacturer component specifications.
NOTE: Manufacturer specifications and design can change without notice.
Tough Tray: RAM-234-3 Laptop "Tough Tray"
Click here to see the RAM-234-3 parts list.
NOTE: The RAM-234-3 tray is pre-assembled.
High strength composite spring loaded expandable tray. Accommodates laptops from 10-16 inches wide (screen size up to 17 inches). Includes 4 side clamping fingers with rubber grips. The fingers are fully adjustable and can be moved both vertically and horizontally.
Tough Tray Dimensions:
Tray Depth: 10.0"
Tray Thickness: 2.125"
Tray Width (Expansion): 10" (min) to 16" (max)
Side Clamp Arm Height: 0.5" (min) to 1.75" (max)
NOTE: RAM Mounts recommends the RAM-234-SNMU Safe-n-Secure kit if the Tough Tray is going to secure a laptop while the vehicle is in motion.
Articulating Swing Arm: RAM-VB-110-1U dual swing arm.
Provides 12 inches of total horizontal extension.
Black powder coated steel with composite twist knobs.
Connects to the Tough Tray and upper Tele-Pole.
Telescoping Tele-Pole Assembly: Upper RAM-VP-TTM8U and lower RAM-VP-TBF9U tele-poles included.
12 to 18 inch vertical height adjustment range.
Tele-Pole may be easily cut with a hack saw to a more desired length.
Upper Tele-Pole: RAM-VP-TTM8U black powder coated steel upper tele-pole mates to the articulating swing arm and lower tele-pole.
Click here to see the upper tele-pole parts list.
NOTE: The upper tele-pole is pre-assembled.
Upper Tele-Pole Dimensions:
A = 1.328" Outside Diameter
B = 2.5" Outside Diameter
C = 8" Tall
Lower Tele-Pole: RAM-VP-TBF9U black powder coated steel lower tele-pole mates to the upper tele-pole and vehicle base
Lower Tele-Pole Dimensions:
A = 1.375" Outside Diameter
B = 3.5" Square Plate
C = 9" Tall
Tele-Pole Options: Click here to see tele-pole options including printer mounts, RAM-VB-REM1 quick disconnect (allows the entire tele-pole assembly to be disconnected from the vehicle base in seconds), RAM-VB-ADJ1 Adjust-A-Pole.
Vehicle Base: Vehicle base dimensions is located on the Description tab.

Below are popular options for RAM Laptop Mount systems:

NOTE: Click here to view all available laptop accessories.

Popular Tough Tray Accessories:

RAM-234-S2U adjustable locking screen support secures the laptop screen to a desired position. Prevents wear and tear of the hinges on the laptop screen from potholes and poor road conditions.
RAM-234K1-4U flat side arms allow the laptop lid to close flat in the Tough Tray when not in use. The included Tough Tray arms DO NOT ALLOW the laptop lid to be closed flat in the Tough Tray.
RAM-234-5U power caddy secures power adapters and cords.
RAM-234-LU USB computer light.
RAM-234-AK1U quick adjust knobs allow Tough Tray retaining arms to be moved easily with no tools.
RAM-234-SNMU Secure-N-Motion kit is RAM recommended if the Tough-Tray is intended to hold a laptop or device while the vehicle is in motion
Click here to view all Tough Tray accessories.

Popular Tele-Pole Accessories:

RAM-VB-109-3U provides an additional 6 inches of swing arm extension. Generally, the standard 12 inches of extension is sufficient.
Click here to view available printer mounts.
Click here to view available Tilt-N-Turn options. Generally, used for police vehicles.
Click here to view all Tele-Pole accessories.

Popular Vehicle Base Accessories:

RAM-VB-REM1 attaches to the vehicle base. This Remove-A-Pole quick disconnect allows the entire laptop system from the vehicle base up to be removed using the quick release pin, no tools required! Perfect for individuals using a vehicle for work and personal use. One of our most popular options.

RAM-VB-ADJ1 attaches to the vehicle base. This Adjust-A-Pole allows additional adjustment of the tele-pole system away from seats or center consoles and provides additional height. Can be used with the RAM-VB-REM1 remove a pole.

RAM-VB-SB4 attaches to the vehicle base. This riser allows the tele-pole system to be positioned away from seats, center consoles or transmission tunnels and provides 4 inches of additional height. Can be used with the RAM-VB-REM1 remove a pole. Generally, this is not needed for most applications.

themountdepot.com

VEHICLE LAPTOP MOUNTS

Mounts by Application

.