The RAM-VP-SW2-89-2461 consists of a 9" lower female Tele-Pole, 8" upper male Tele-Pole, single swing arm and 3.625" square base that contains the VESA hole pattern. The lower female Tele-Pole will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole becomes a rigid support for connecting devices or cradles. The 3.625" square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge.
RAM-VP-SW2-89-2461 shown above.
This laptop configuration provides a telescoping feature that allows a vertical height adjustment range from 12 to 18 inches (additional height ranges are available).
RAM-VP-SW2-89-2461 Features:
Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Articulating Arm and VESA Plate Included: RAM-2461U black powder coated aluminum VESA plate. The 3.625" square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge. The RAM-VB-110-5NBU single Swing Arm with swivel socket is included as well.
Telescoping Pole Included: "Tele-Pole" showed assembled with bottom tele-pole RAM-VB-TBF9U and upper tele-pole RAM-VB-TTM8U. The tele-pole allows a height adjustment range from 12 to 18 inches. For an even more custom installation, the tele-pole may be easily cut with a hack saw to a more desired length.
Upper Tele-Pole Included: RAM-VP-TTM8U black powder coated steel 8 inch upper tele-pole mates to the articulating arm and lower tele-pole.
Upper Tele-Pole Dimensions: A = 1.328" OD, B = 2.5", C = 8"
Lower Tele-Pole Included: RAM-VP-TBF9U black powder coated steel 9 inch lower tele-pole mates to the upper tele-pole and vehicle base
Lower Tele-Pole Dimensions: A = 1.375" OD, B = 3.5", C = 9"
