Home > Fishing & Paddlesport > Marine - Fish Finder and Chartplotter Assemblies (Garmin, Humminbird, Lowrance, Raymarine, etc.) > 1.5" C-Ball Sized Assemblies (10 Pound Max) > Misc. Assemblies: Humminbird Helix 5, Helix 7, Garmin Echo, Raymarine Dragonfly, etc) >

COMPOSITE 2.5 Inch Dia. Base with 1.5" Dia. Rubber Ball, Standard Sized Length Arm and RAM-202-G2U 2.5" Dia. Plate for Selected Garmin Marine Devices (Light Duty)
COMPOSITE 2.5 Inch Dia. Base with 1.5" Dia. Rubber Ball, Standard Sized Length Arm and RAM-202-G2U 2.5" Dia. Plate for Selected Garmin Marine Devices (Light Duty)
 
Alternative Views:

STOCK STATUS: In Stock - Ships Next Bus. Day

Free Shipping
Product Code: RAP-101-G2U
QTY:

DESCRIPTION TECHNICAL SPECS
 

**CLICK HERE for the Latest Fish Finder & Chartplotter Compatibility Guide for this Mount.**

The RAP-101-G2U is a composite mounting kit with a 2.5 inch diameter base (RAP-202U) with 1.5 inch diameter rubber ball, standard sized length arm (RAP-201U) and adapter plate for selected Garmin Fishfinders & GPSMAP Devices.

The mount is 7.35'' tall at maximum extension and is collapsible. Rubber ball and socket feature dampens shock and vibration.



RAP-101-G2U shown above.

RAP-101-G2U Features:

  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Mounting Plate: 2.5 inch diameter round composite plate with attached 1.5 inch C Ball and hardware pack for selected Garmin Fishfinders & GPSMAP Devices.
  • Base Plate: RAP-202U is a 2.5 inch diameter round composite plate with attached 1.5 inch C Ball. Base mounting hardware NOT included.
  • Arm Included: RAP-201U is a composite standard sized length arm 4.55 inches in length from socket center to socket center and 5.625 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!

  • Security Option (NOT INCLUDED):
    • RAM-KNOB5LU keyed lock shown below is available and replaces the plastic twist knob found on the RAM-201 series arm.

ACCESSORIES FOR THIS PRODUCT...
Double Socket Arm Keyed Lock for RAM-201 Series with 1/4"-20 Brass Hole Double Socket Long Sized Length Arm for 1.5 Inch Ball (9.125 Inches in Overall Length) Double Socket Short Sized Length Arm for 1.5 Inch Ball (3.5 Inches in Overall Length) RAM-ROD 2000 RAIL MOUNT ADAPTER KIT
Price $29.99

Add Free Shipping
Price $49.49

Add Free Shipping
Price $24.99

Add Free Shipping
Price $8.99

Add Free Shipping
Double Socket Arm Keyed Lock for RAM-201 Series with 1/4"-20 Brass Hole Double Socket Long Sized Length Arm for 1.5 Inch Ball (9.125 Inches in Overall Length) Double Socket Short Sized Length Arm for 1.5 Inch Ball (3.5 Inches in Overall Length) RAM-ROD 2000 RAIL MOUNT ADAPTER KIT
RAM-ROD 2007 Fishing Rod Holder with Rectangle Flat Surface Base RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System and Round Flat Surface Base
Price $26.99

Add Free Shipping
Price $40.99

Add Free Shipping
RAM-ROD 2007 Fishing Rod Holder with Rectangle Flat Surface Base RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System and Round Flat Surface Base


Browse for more products in the same category as this item:

Fishing & Paddlesport > Marine - Fish Finder and Chartplotter Assemblies (Garmin, Humminbird, Lowrance, Raymarine, etc.) > 1.5" C-Ball Sized Assemblies (10 Pound Max) > Misc. Assemblies: Humminbird Helix 5, Helix 7, Garmin Echo, Raymarine Dragonfly, etc)