RAP-B-378-238U RAM Mount 2.5" Adhesive Base w Std Sized Arm & Diamond Plate

Price $30.99

STOCK STATUS: Out of Stock - Email for ETA

Product Code: RAP-B-378-238U

The RAP-B-378-238U is a simple and attractive device adhesive holder with standard sized arm and diamond adapter plate.  

RAP-B-378-238U shown above.

NOTE: Purchase of this product DOES NOT INCLUDE a RAM Mounts Holder.

RAP-B-378-238U Includes the Following:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Base: RAP-B-378U 2.5 inch adhesive disk base with composite 1 inch diameter ball.

Arm: RAP-B-201U Standard sized arm measures 3.6875 inches in overall length and 3.0 inches from socket center to center socket. A plastic twist knob allows the arm to be positioned at virtually any angle needed on the base.
Adapter: RAP-B-238U composite diamond adapter plate with 2 holes 1.9 inches apart from center hole to center hole. This adapter is compatible with any RAM Mounts holder that contains the diamond shape in back of the cradle.
Description: Using an adhesive disk, put the RAP-B-378-238U practically anywhere you want to keep your handheld device easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy.

Instructions

General recommendations to properly adhere the adhesive disc.
1. Ensure that both the dashboard surface and the bottom of the Ram Mount base have been thoroughly cleaned and dried.
2. Attach either side of adhesive to the base first, let it sit several hours to allow adhesive to thoroughly bond.
3. Attach other side of adhesive (with base) to the dashboard surface.
4. Let the adhesive disc sit several hours before adding socket arm components, etc. to allow the adhesive to properly bond to the dashboard surface.