RAP-B-379-GOP1U RAM Mount Harley Davidson Mount w/ Go Pro Adapter

The RAP-B-379-GOP1U consists of a 1/4"-20 X .25" thread, connected to a 1 inch diameter ball, female blind barrel nut and nylon washer (fits select Harley Davidson touring models), standard sized length arm and Go Pro adapter plate for the following models:

GoPro HD HERO
GoPro HD HERO2
GoPro HD HERO3
GoPro HD HERO 960

RAP-B-379-GOP1U shown above.

RAP-B-379-GOP1U Manufacturer Included Features:
NOTE: Manufacturer features and specifications can change without notice. Please visit the manufacturer's website for the latest product information.

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Base Dimensions: 1/4"-20 X .25" thread with 1 inch diameter rubber ball.
Base Description: RAP-B-379-HA1U has a patented rubber ball that dampens shock and vibration helping to maintain the performance of the mounted device. Simple to use and install. Designed to be compact and discrete, the RAP-B-379-HA1U won’t take up a lot of space but will provide a world of mounting possibilities.

Base Fitment: This base secures to the open/unused mirror post found on either the brake or clutch housing assembly on SELECT Harley Davidson touring motorcycles. This base WILL NOT WORK on models where the mirror is attached directly to the brake or clutch housing assembly. The mirror post opening has to be unused (i.e. Street Glides, Electra Glides, etc.) where the mirror is secured to the fairing and NOT the mirror post found on the brake or clutch assembly.
Base Features:
1. Base can be mounted above or below mirror holes
2. Rubber ball dampens shock and vibration
3. High strength materials ensure product longevity
Base Installation Instructions:
1. Locate fairing mirror holes.
2. Place the nylon washer over the barrel nut. Insert the barrel nut into the hole on the controls.
3. Screw the threaded ball into the barrel nut from the other side of the hole. Tighten with 5/8" and 1/2" wrench.
Included Arm: RAM-B-201U black powder coated marine grade aluminum standard sized length arm for 1 inch balls.
- Measures 3.0 inches between socket centers.

Measures 3.6875 inches in overall total length.

The arm allows for easy adjustment by loosening the plastic side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached base accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories.

Included GoPro Adapter: RAP-B-202U-GOP1 composite adapter with 1 inch rubber ball.

themountdepot.com

VEHICLE LAPTOP MOUNTS

Mounts by Application

.