Home > Smartphone Mounts > Adhesive Universal Cell & Smartphone Assemblies >

Universal 2.5 Inch Adhesive Flex Stick Base and RAM-HOL-UN1U Small Electronic Holder (Fits Device Width 1.5" to 2.5")
Universal 2.5 Inch Adhesive Flex Stick Base and RAM-HOL-UN1U Small Electronic Holder (Fits Device Width 1.5" to 2.5")
 
Price $55.49

STOCK STATUS: In Stock - Ships Next Bus. Day

Free Shipping
Product Code: RAP-SB-178-UN1U
QTY:

DESCRIPTION
 
The RAP-SB-178-UN1U is a simple and attractive design that offers a semi-permanent mounting solution with a universal cradle for small electronic devices.


RAP-SB-178-UN1U shown above.

RAP-SB-178-UN1U Includes the Following:
  • Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
  • Base Description: The base includes a 2.5 inch RAM-202PSA 3M semi-permanent adhesive disk pad that attaches firmly to a flat surface. 
  • Arm: Flexible snap link arm that allows the ultimate in versatility.
  • Adapter: Composite black powder coated universal diamond plate. Two holes measuring 1.9 inches from center to center is compatible with the AMPS hole pattern and any RAM Mount holder (RAM-HOL-xxxx) for future mounting options.
  • Cradle Included: Includes RAM-HOL-UN1U high strength plastic small side clamping cradle is designed to hold a large amount of different kinds of cell phones and electronic devices such as cell phones, MP3s, etc. This cradle has padded locking side clamps that close tightly on the item you want to hold. To release the clamp hold, simply press the button found at the bottom left side of the cradle which will spring the clamps open. At the base of the cradle are two small supports to hold the bottom of the item securely in the cradle. 
  • Cradle Dimensions: Below are the dimensions the RAM-HOL-UN1U cradle will accommodate:
    Minimum Width: 1.5 inch
    Maximum Width: 2.5 inch
    Side Clamp Height: 1.56 inch
    Side Clamp Depth: 1.13 inch
    Cradle Height: 3.62 inch
  • NOTE: The top of the cradle is open allowing electronic devices to be taller than the height of the cradle.
  • Optional Cradles (NOT INCLUDED): To find other cradles for Apple, cell phone or GPS holder click here.
Instructions
  • General recommendations to properly adhere the adhesive disc.
    1. Ensure that both the dashboard surface and the bottom of the Ram Mount base have been thoroughly cleaned and dried.
    2. Attach either side of adhesive to the base first, let it sit several hours to allow adhesive to thoroughly bond.
    3. Attach other side of adhesive (with base) to the dashboard surface.
    4. Let the adhesive disc sit several hours before adding socket arm components, etc. to allow the adhesive to properly bond to the dashboard surface.

ACCESSORIES FOR THIS PRODUCT...
Apple iPhone RAM-HOL-AP3U Cradle for 1st Generation (Non 3G) WITHOUT Case or Cover Universal 2.5 Inch Adhesive Flex Stick Base with Snap Link Mount Universal Finger Gripping Cradle (Fits Device Width 1.25" to 3.5" Including GPS, eTrex, 2 Way Radios, Smartphones with Cover/Case iPhone, Droid, etc.) Universal Small Sized Electronic Device Holder (Fits Device Width 1.5" to 2.5")
Price $10.99

Add Free Shipping
Price $21.49

Add Free Shipping
Price $34.99

Add Free Shipping
Price $24.49

Add Free Shipping
Apple iPhone RAM-HOL-AP3U Cradle for 1st Generation (Non 3G) WITHOUT Case or Cover Universal 2.5 Inch Adhesive Flex Stick Base with Snap Link Mount Universal Finger Gripping Cradle (Fits Device Width 1.25" to 3.5" Including GPS, eTrex, 2 Way Radios, Smartphones with Cover/Case iPhone, Droid, etc.) Universal Small Sized Electronic Device Holder (Fits Device Width 1.5" to 2.5")
Apple iPod Nano RAM-HOL-AP5U Cradle for iPod Nano (3rd Generation WITHOUT Case or Cover) Easy Mount Quick Release Adapter Set for RAM-B-238 and RAM Holders
Price $13.49

Add Free Shipping
Price $9.49

Add Free Shipping
Apple iPod Nano RAM-HOL-AP5U Cradle for iPod Nano (3rd Generation WITHOUT Case or Cover) Easy Mount Quick Release Adapter Set for RAM-B-238 and RAM Holders


Browse for more products in the same category as this item:

Smartphone Mounts > Adhesive Universal Cell & Smartphone Assemblies
Adhesive Base Stick Mounts > RAP-SB-178 (.75 Inch Snap Link Ball and Socket Arm) Assemblies with Cradle > Universal Assemblies
Adhesive Base Stick Mounts > RAP-SB-178 (.75 Inch Snap Link Ball and Socket Arm) Assemblies with Cradle > Smartphone Assemblies
Smartphone Mounts > Universal Cell & Smartphone Assemblies by Device Width (Fits Width Range from .875" to 4.5") > UN1U Series Assemblies (1.5" to 2.5" Device Width)