RAM-VPR-104-247-4 RAM Forklift Printer System for Epson, Intermec & O'Neil Printers

Description

The RAM-VPR-104-247-4 is a 4 inch square rail clamp base forklift printer cradle system that is the perfect printing solution for the following models:

Epson TM-P60
Epson T88
Intermec PB2
Intermec PB3
Intermec PB20
Intermec PB21
Intermec PB22
Intermec PB40
Intermec PB41
Intermec PB42
O'Neil 2TE
O'Neil 4T
O'Neil 4TE
O'Neil 4TE with Card Reader

NOTE: This printer system will accommodate other printers with similar dimensions shown below in the technical drawing. Please call 224-578-9162 or complete the product inquiry form by clicking here if you have questions about your printer device.

RAM-VPR-104-247-4 shown above.

The RAM-VPR-104-247-4 Included Features:

Warranty: Manufacturer's, National Products Inc., life time warranty.
Material: Black powder coated marine grade aluminum.
Cradle Description: The RAM Quick Draw Jr. holders use a unique patent pending spring loaded mechanism that holds strong, yet provides easy removal for printer storage. At each end of the spring loaded cradle, RAM have designed a short side clamp plate that is designed to fit cleanly around either edge of the printer. This is the perfect accessory for the mobile professional who’s on the go. Light weight yet strong, these printer holders help get the job done.
Cradle Dimensions:

Min Width: 5.625 inches
Max Width: 10 inches
Height Clearance for Printer: 2.25 inches

NOTE: Please see the RAM-VPR-105 series if you need the Tall Side Clamps (11 Max Width to 3.125 Max Height).
Mounting Assembly: The RAM-VPR-104-247-4 includes the RAM-101-247-4 forklift assembly shown below:

Square Rail Clamp Base Included: RAM-247U-4 is a 4 inch square rail clamp base. The square rail base will wrap around a maximum width of 4 inch and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles

Arm Included: RAM-201U shown below is the standard length double socket arm that measures 4.55 inches between socket centers and 5.625 inches in overall length. The arm is black powder coated marine grade aluminum with a plastic twist knob. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility.

Mounting Plate Included: RAM-202U shown below is a black powder coated marine grade aluminum 2.5 inch diameter round plate with pre-drilled holes and 1.5 inch diameter rubber ball. The plate will attach to the RAM-201 arm and RAM-VPR-104 cradle.

Forklift 4 Inch Rail Clamp Printer System (Short Side Clamps) for Epson, Intermec & O'Neil Printers

Forklift 4 Inch Rail Clamp Printer System (Short Side Clamps) for Epson, Intermec & O'Neil Printers