RAM-VB-108 RAM Laptop Mount Base for Ford F Series Trucks

Discontinued Replaced by RAM-VB-185

Product Code: RAM-VB-108

Price: $0.00

Description

RAM-VB-108 vehicle base for the following vehicles:

FORD EXCURSION (2000-2005)

FORD EXCURSION EDDIE BAUER (2000-2005)

FORD F-250, F-350, F-450, F-550, F-650 & F-750 SUPER DUTY TRUCKS (1999-2010)

FORD F-350 SUPER DUTY TRUCKS (1997)

NOTE: As auto manufacturers redesign vehicle models this base may or may not fit additional models. If you do not see your vehicle listed contact us or complete the product inquiry form by clicking here.

NOTE: Click here for Airbag Safety and RAM Mounting Systems.

NOTE: See the RAM-VB-108-SW1 complete laptop system by clicking here.

Special Vehicle Requirements: In the Ford Excursion Limited and Eddie Bauer editions, the heater duct prevents access to left seat stud. The mount can be used by removing the carpet and plugging the heater duct. If this is unacceptable, the RAM-VBD-101 can be used as an alternative.

RAM-VB-108 Manufacturer Specifications:

NOTE: Manufacturer specifications can change without notice.

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Material: Black powder coated steel.
Seat Configuration: Bucket or bench seats only.
Installation: No-drill installation. Attaches to existing seat studs.
Mount/Base Placement: Passenger side floor, in front of seat.
- NOTE: Vehicle base will limit seat travel.
Vehicle Base Quick Disconnect: Optional. See RAM-VB-REM1 below.
Vehicle Base Dimensions:
- Dimension A: 18.75 inches
- Dimension B: 5.63 inches
- Dimension C: 6.4375 inches
- Dimension D: 13.25 inches
- Center to Center Hole Seat Bolt Distance: 11.5 inches
- NOTE: Center to Center Hole Seat Bolt Distance is the center hole distance of the two pre-drilled holes in the vehicle base that line up with the vehicle seat bolts. This distance MUST MATCH your vehicle.

RAM-VB-108 Vehicle Base Options (NOT INCLUDED) Shown Below:

RAM-VB-REM1 attaches to the vehicle base. This Remove-A-Pole quick disconnect allows the entire laptop system from the vehicle base up to be removed using the quick release pin, no tools required! Perfect for individuals using a vehicle for work and personal use. One of our most popular options.

RAM VB-108 Popular Tough Tray Options (NOT INCLUDED) Shown Below:

Options including screen supports (keeps computer screen locked in position, most popular option), flat side arms (allows computer lid to close flat while in the Tough Tray), power caddy (holds power supplies), Secure-N-Motion kit (recommended by RAM when laptops are secured in the Tough Tray while driving), USB computer light, printer mounts (Canon, Epson, HP, etc) and more! Click the links below to learn more.

Click here to view Tough Tray Accessories (i.e. Screen Support).
Click here to view Tele-Pole acceesories (i.e. Remove-A-Pole).
Click here to view all printer mounts.
Click here to view all laptop accessories.

Features

Click here to view the RAM Mount Vehicle Laptop installation video.
NOTE: If your vehicle is equipped with an airbag sensor under the seat disconnect the sensor before installing the vehicle base. (If unsure contact your local car dealer.) The video shown is for installation reference and may show additional or less parts than your vehicle base (RAM stabilizer foot that attaches to the base/lower tele-pole as shown in the video). Simply follow the video without installing these components if your vehicle base does not include these parts. Your vehicle base may connect to the seat track bolts differently than shown in the video. The instructions shown to install the RAM tele-pole system, swing arm assembly and Tough Tray are the same for all RAM No-Drill laptop systems regardless of the vehicle base used.
NOTE: Click here to view Airbag Safety and RAM Mounting Systems (Adobe required).