RAM-101U-VE1-HC1 RAM Mount Drill Down Base w/ Handi-Case System

Universal Drill Down Pivot Base with 18 Inch Post with RAM Handi-Case System

Home

View cart

Universal Drill Down Pivot Base with 18 Inch Post with RAM Handi-Case System

Product Code: RAM-101U-VE1-HC1

Price: $321.99

Description

The RAM-101U-VE1-HC1 is a universal drill down pedestal stand with 18 inch long arm and RAM Handi-Case. The RAM-101U-VE1-HC1 includes the RAM-HC1U Handi-Case and RAM-101U-VE1 pedestal assembly.

RAM-101U-VE1-HC1 shown above.

RAM-101U-VE1-HC1 Included Features:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.

Handi-Case Material: High strength composite.

Handi-Case Description: Multiple mounting points on the top and bottom to attach any number of popular RAM rubber ball bases or mounting plates for unsurpassed versatility.

Two convenient mounting points on the top for a cell phone, GPS, or other small electronics mount.
Multiple punch outs on the sides and back, it is even possible to run power into or out of the RAM Handi-Case.
Multiple storage spaces inside the case to hold documents, pens, nuts, bolts, etc...
Pockets for magnets that can be used to hold pens.

RAM-101U-VE1 Description is a universal drill down pedestal stand that can be used to secure many electronic devices. This universal stand has a pivoting base that allows the base to be secured to an angled horizontal or vertical surface.

RAM-101U-VE1 Included Features:

Material: Marine grade aluminum and steel.
RAM-282U: Includes the RAM-282U 5 inch square plate with female pivot lock at 90 degrees. The pivoting lock allows the base to set at any any angle between horizontal and vertical to the mount. Connects to arm with male teeth RAM-284U to form an articulating base for angled surfaces. Includes 8 pre-drilled holes for surface connection.

NOTE: HARDWARE NOT INCLUDED: Hardware to secure the RAM-282U base to the surface is not included. 4 bolts/nuts are recommended to secure the base.

RAM-284U: Includes the RAM-284U is a .5 inch pipe clamp with a male pivot lock. This part attaches to the RAM-282U to form an articulating base for angled surfaces.

RAM-PA8218: Includes the RAM-PA8218 18 inch long rigid aluminum 1/2 inch diameter pipe is powder coated and has a 1/2 inch NPT Male thread at either end. This arm is commonly used for many laptop tray mounting systems or to secure other electronic devices.

RAM-218-1U: Includes the RAM-218-1U: 1.5 C size ball with .5 NPT female thread.

NPT Size: 1.5 inch C ball sized socket and .5 inch NPT female thread.
Description: The RAM-218-1U connects to any .5 inch NPT male thread, including the RAM-PA-82xx series. The single socket can connect to any 1.5 inch C ball sized accessory.

RAM-201U: Includes the RAM-201U standard length arm:

Arm Material: Black powder coated marine grade aluminum with plastic twist knob.
Arm Length Socket Center to Socket Center: 4.55 inches.
Overall Arm Length: 5.625 inches.

RAM-202U: Includes the RAM-202U 2.5 inch diameter plate.

Plate Material: Black powder coated marine grade aluminum.
AMPS Hole Pattern: Yes. The base has seven holes including the universal AMPS hole pattern.
Plate Diameter: 2.5 inch diameter.