Description
The The RAM-108-DU consists of a long double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap base. The strap will accommodate rails from 1" to 2.1" in diameter. The trolling motor stabilizer will take every bit of the vibration out of your trolling motor while all the time protecting the head, shaft and mount from damage. A must for any angler with a bow mount trolling motor.
The maximum allowable distance between the mounting surface on the boat and the lowest point of the trolling motor shaft is 12”. Distances shorter than this are compatible.
NOTE: Same part as RAM-108-1-D.
RAM-108-DU shown above.
RAM-108-DU Includes the Following:
Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Material: Black powder coated marine grade aluminum.
Ball Size: C ball sized 1.5 inch diameter rubber ball. Maximum weight 10 lbs.
Base Included: RAM-108BU shown below is a black powder coated marine grade aluminum single strap base with 1.5 diameter rubber ball and metal strap. The metal straps (2 included) will accommodate a rail diameter from .5 inch to 2 inches.
Arm Included: RAM-201U-D shown below is the long length double socket arm that measures 8.75 inches between socket centers and 9.125 inches in overall length. The arm is black powder coated marine grade aluminum with a plastic twist knob and accepts 1.5 inch diameter balls. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached accessories. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached accessory. This enables the arm and accessories to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
Plate Included: RAM-202U shown below is a universal 2.5 inch diameter round plate with pre-drilled holes that can be used to connect to a large variety of third party cradles and holders (RAM Mounts plastic holders and aqua boxes, i.e. RAM-HOL-xxxx) including those with the industry standard AMPS hole pattern. The plate is black powder coated marine grade aluminum with a 1.5 inch diameter rubber ball.
