2.5 Inch Adhesive Base with Composite Standard Sized Arm and RAM-HOL-UN10BU Large X-Grip Phone Holder (Fits Device Width 1.75" to 4.5")

2.5 Inch Adhesive Base with Composite Standard Sized Arm and RAM-HOL-UN10BU Large X-Grip Phone Holder (Fits Device Width 1.75" to 4.5")

Product Code: RAP-B-378-UN10U

Price: $61.99

Please correct the following:

STOCK STATUS: Out of Stock - Email for ETA

Description

The RAP-B-378-UN10U is a 2.5 inch diameter adhesive disk base, plastic arm and composite universal spring loaded X Grip IV holder. The holder (RAM-HOL-UN10BU) will fit devices within the following dimensions:

• Minimum Width = 1.75"
• Maximum Width = 4.5"

NOTE: Questions? Complete the product inquiry form by clicking here.




RAP-B-378-UN10U shown above.



RAP-B-378-UN10U Includes the Following:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.

Included Base: RAP-B-378U 2.5 inch adhesive disk base with 1 inch diameter rubber ball. Put the base practically anywhere you want to keep your handheld device easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy.

Included Arm: RAP-B-201U composite arm measures approximately 3.0 inches between socket center to socket center and is 3.6875 inches in total length. A tightening knob on the side of the arm enables the sockets to clamp firmly to a RAM 1 inch diameter ball. When loosening the side knob, you can pivot the ball and socket connections or completely disconnect the ball from the socket.

Included Holder: RAM-HOL-UN10BU

Holder Material: Black high strength composite with rubber tips.

• Spring loaded holder expands and contracts for perfect fit of your devices.
• 1 inch rubber diameter rubber ball connects to RAM "B" sized 1 inch socket parts.
• Rubber coated tips will hold device firm and stable.
• Single socket technology allows for multiple adjustment angles and articulation of device.

• Manufacturer's Description: The X-Grip IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect complement to the modern sleek interior of today's vehicles, the X-Grip IV is the phablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phablet and become the most useful accessory in your vehicle.
  
  

Features

• General recommendations to properly adhere the adhesive disc.
  
  1. Ensure that both the dashboard surface and the bottom of the Ram Mount base have been thoroughly cleaned and dried.
  2. Attach either side of adhesive to the base first, let it sit several hours to allow adhesive to thoroughly bond.
  3. Attach other side of adhesive (with base) to the dashboard surface.
  4. Let the adhesive disc sit several hours before adding socket arm components, etc. to allow the adhesive to properly bond to the dashboard surface.