Description
The RAM-D-111-C-IN1 is a 11 inch by 3 inch rectangular marine grade aluminum universal mounting plate with STEEL post, short sized length arm and 3.68 inch diameter base with STEEL post and a 2.25 inch diameter rubber ball. The mounting plate has pre-drilled holes and can also be custom drilled allowing many different type of electronic devices to be mounted securely.
RAM-D-111-C-IN1 shown above.
NOTE: Mounting hardware is not included.
RAM-D-111-C-IN1 Features:
Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Overall Height: Approximately 8.25 inches when positioned fully extended.
Mounting Plate Material: Black powder coated marine grade aluminum with pre-drilled holes and steel post. NOTE: This marine grade aluminum plate can also be drilled into for a custom hole pattern.
Mounting Plate Dimensions: 11 inches * 3 inches with a 2.25 inch diameter "D" sized rubber ball. Max. Weight 15 lbs.
Mounting Plate Description: RAM-D-111B-IN1U shown below has many different combination of pre-drilled holes which will match many electronic devices.
Base Plate Included: RAM-D-202U-IN1 shown below is a marine grade aluminum universal is a 3.68 inch round marine grade aluminum universal plate with steel post and a 2.25 inch diameter rubber ball.
Arm Included: RAM-D-201U-C shown below is the short length marine grade aluminum arm 3.1875 inches in length from socket center to socket center and 5.0625 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!