Description
The RAM-D-101U-C-MI1-2461 is a marine grade aluminum flat surface mount with a 3.68 inch diameter base plate, SHORT sized length arm with jam nut and 3.68 inch square VESA 4 x 75mm compatible plate.
RAM-D-101U-C-MI1-2461 shown above.
NOTE: Base and mounting plate hardware is not included.
RAM-D-101U-C-MI1-2461 Features:
Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Material: Black powder coated marine grade aluminum.
Socket Ball Size: Connects to 2.25 inch D Ball Size / Max. Weight 15 lbs.
Base Plate Included: RAM-D-202U shown below is included. The RAM-D-202U is a universal marine grade aluminum 3.68 inch diameter plate with a 2.25 inch diameter rubber D sized ball. The plate has pre-drilled holes. Three holes are the standard RAM pattern located 120 degrees apart plus one extra hole in between.
Arm Included: RAM-D-201U-C-MI1 shown below is the short length marine grade aluminum arm with jam nut. 3.1875 inches in length from socket center to socket center and 5.0625 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
VESA Plate Included: RAM-D-2461U shown below is a VESA 75mm compatible standard plate. The plate consists of a 2.25 inch diameter rubber ball connected to a 3.68 inch square plate with 4 x 75mm holes in each corner.
