2.5 Inch Adhesive Flex Stick Base with Garmin RAM-HOL-GA14U Holder (Selected GPSMAP 76(C,CS,CSX) and 96(C) Series)

2.5 Inch Adhesive Flex Stick Base with Garmin RAM-HOL-GA14U Holder (Selected GPSMAP 76(C,CS,CSX) and 96(C) Series)

Product Code: RAP-SB-178-GA14U

Price: $25.99

Please correct the following:

STOCK STATUS: In Stock - Ships Next Bus. Day

Description

The RAP-SB-178-GA14U is a simple and attractive design that offers a semi-permanent mounting solution. The mounting solution includes a cradle that works with the following Garmin devices:


  • Garmin GPSMAP 76C
  • Garmin GPSMAP 76CS
  • Garmin GPSMAP 76Cx
  • Garmin GPSMAP 76CSx
  • Garmin GPSMAP 96
  • Garmin GPSMAP 96C


 

NOTE: The Garmin GPS 72, GPS 76, GPSMAP 76 and GPSMAP 76S WILL NOT FIT this holder. These units require the RAM-HOL-GA6U holder.



NOTE: As the manufacturer adds new units/models to the above series this cradle may fit additional models not listed above. Please call 224-578-9162 or complete the product inquiry form by clicking here.





RAP-SB-178-GA14U Includes the Following:

Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.

Base Description: The base includes a 2.5 inch RAM-202PSA 3M semi-permanent adhesive disk pad that attaches firmly to a flat surface. 

Arm: Flexible snap link arm that allows the ultimate in versatility.

Adapter: Composite black powder coated universal diamond plate. Two holes measuring 1.9 inches from center to center is compatible with the AMPS hole pattern and any RAM Mount holder (RAM-HOL-xxxx) for future mounting options.

Cradle Included: Includes RAM-HOL-GA14U high strength plastic holder. Place the top of the GPS into the cradle, and then push the base into the expandable arms at the bottom of the holder. The arms will then snap into place when the GPS is completely secured in the cradle. The cradle allows all cables (not included) to stay connected while the GPS unit is in the cradle.


Optional Cradles (NOT INCLUDED): To find other cradles for Apple, cell phone or GPS holder click here.

Features

• General recommendations to properly adhere the adhesive disc.
  
  1. Ensure that both the dashboard surface and the bottom of the Ram Mount base have been thoroughly cleaned and dried.
  2. Attach either side of adhesive to the base first, let it sit several hours to allow adhesive to thoroughly bond.
  3. Attach other side of adhesive (with base) to the dashboard surface.
  4. Let the adhesive disc sit several hours before adding socket arm components, etc. to allow the adhesive to properly bond to the dashboard surface.