Description
The RAM-B-120U is a marine grade aluminum universal electronics device holder with a 2.5 inch diameter base, standard length arm, and large sized aluminum clamping holder. The mounting plate can be used for many electronic devices.
RAM-B-120U shown above.
NOTE: Mounting hardware is not included for the base.
RAM-B-120U Features and Options:
Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
Material: Marine grade aluminum.
Cradle Included: RAM-B-120BU side clamping cradle is designed to hold large sized electronic devices. This cradle has padded locking side clamps that close tightly on the item you want to secure. To release the side clamp hold simply press the button, found at the bottom left side of the cradle, which then allows the side clamps open. At the base of the cradle is additional support to hold the bottom of the device securely in the cradle. The cradle includes a 1.0 inch diameter rubber ball connected to the back of the cradle.
RAM-B-120BU Cradle Dimensions:
-
Minimum Width: 1.5'' (with foam), 2.43'' (without foam)
-
Maximum Width: 3.5'' (with foam), 4.5'' (without foam)
-
Clamp Height: 2.62''
-
Cradle Height: 6.5''
-
Clamp Depth: 1.38''
NOTE: The top of the cradle is open. This allows secured devices to be larger then the height of the actual cradle.
Socket Ball Size: Connects to 1.0 inch B Ball Size / Max. Weight 5 lbs.
Base Plate Included: RAM-B-202U shown below is a marine grade aluminum universal 2.5 inch diameter plate with a 1.0 inch rubber ball. The plate has pre-drilled holes, including the universal AMPS hole pattern.
Arm Included: RAM-B-201U shown below is a standard length marine grade aluminum arm 2.875 inches in length from socket center to socket center and 3.6875 inches in overall length. A tightening knob on the side of the arm enables the sockets to clamp firmly to the attached base and mounting plate. The arm allows for easy adjustment by loosening the side knob, a single spring inside the arm opens the sockets, allowing the arm to pivot on the attached plates. This enables the arm and mounting plate to be positioned at various angles allowing the ultimate in position flexibility. Loosen the knob completely and the arm will disconnect from the accessories in seconds!
