Ram 1500, 2500, 3500, 4500, 5500 (2008-2011) Laptop Vehicle Base with Riser

Ram 1500, 2500, 3500, 4500, 5500 (2008-2011) Laptop Vehicle Base with Riser

Product Code: RAM-VB-178

MSRP Price: $0.00

Price: $95.49

Please correct the following:

STOCK STATUS: In Stock - Ships Next Bus. Day

Description



RAM-VB-178 laptop vehicle base for the following vehicles:

• RAM 1500 (2008-2011)
• RAM 2500/3500/4500/5500 (2008-2011)
• Please see the RAM-VB-178A for 2012-2018 Ram models.

NOTE: As auto manufacturers redesign vehicle models this base may or may not fit additional models. If you do not see your vehicle listed contact us or complete the product inquiry form by clicking here.

NOTE: Click here for Airbag Safety and RAM Mounting Systems.

NOTE: See the RAM-VB-178-SW1 complete laptop system by clicking here.

Special Requirements: Bucket seats only. Call/email about bench seats. Will NOT interfere with 4WD Lever or factory installed consoles.

RAM-VB-178 Manufacturer Specifications:

NOTE: Manufacturer specifications can change without notice.

• Warranty: Manufacturer's, RAM Mounts (National Products Inc.), Limited Life Time Warranty.
• Material: Black powder coated steel .
• Seat Configuration: Bucket seats only. Call/email about bench seats.
• Installation: No-drill installation. Attaches to existing seat studs.
• Mount/Base Placement: Passenger side, front, where seat rail frame attaches to floor board.
  • NOTE: Vehicle base will limit seat travel.
• Vehicle Base Quick Disconnect: Optional. See RAM-VB-REM1 below.
• Vehicle Riser: Included. RAM-VB-SB4 4 inch riser below attaches to the vehicle base. Can be used with the Optional RAM-VB-REM1 remove a pole.

  

• Vehicle Base Dimensions:
  • Dimension A: 14.75 inches
  • Dimension B: 3.8 inches
  • Dimension C: 1.75 inches
  • Center to Center Hole Seat Bolt Distance: 13.25 inches
  • NOTE: Center to Center Hole Seat Bolt Distance is the center hole distance of the two pre-drilled holes in the vehicle base that line up with the vehicle seat bolts. This distance MUST MATCH your vehicle.



RAM-VB-178 Vehicle Base Options (NOT INCLUDED) Shown Below:

• RAM-VB-REM1 attaches to the vehicle base. This Remove-A-Pole quick disconnect allows the entire laptop system from the vehicle base up to be removed using the quick release pin, no tools required! Perfect for individuals using a vehicle for work and personal use. One of our most popular options.

RAM VB-178 Popular Tough Tray Options (NOT INCLUDED) Shown Below:

Options including screen supports (keeps computer screen locked in position, most popular option), flat side arms (allows computer lid to close flat while in the Tough Tray), power caddy (holds power supplies), Secure-N-Motion kit (recommended by RAM when laptops are secured in the Tough Tray while driving), USB computer light, printer mounts (Canon, Epson, HP, etc) and more! Click the links below to learn more.

• Click here to view Tough Tray accessories (i.e. Screen Support).
• Click here to view Tele-Pole accessories (i.e. Remove-A-Pole).
• Click here to view all printer mounts.
• Click here to view all laptop accessories.

Features

• Click here to view the RAM Mount Vehicle Laptop installation video.
• NOTE: If your vehicle is equipped with an airbag sensor under the seat disconnect the sensor before installing the vehicle base. (If unsure contact your local car dealer.) The video shown is for installation reference and may show additional or less parts than your vehicle base (RAM stabilizer foot that attaches to the base/lower tele-pole as shown in the video). Simply follow the video without installing these components if your vehicle base does not include these parts. Your vehicle base may connect to the seat track bolts differently than shown in the video. The instructions shown to install the RAM tele-pole system, swing arm assembly and Tough Tray are the same for all RAM No-Drill laptop systems regardless of the vehicle base used.
• NOTE: Click here to view Airbag Safety and RAM Mounting Systems (Adobe required).