Description
The RAP-B-104-224-GA12U is a universal high strength composite suction cup mount with a 3.25 inch diameter locking suction cup base and Garmin cradle. The suction cup mount consists
of a 1 inch diameter ball and socket with rotating and pivoting
button system and RAM plastic universal diamond plate. This device fits the following Garmin models:
- Garmin GPS 60
- Garmin GPSMAP 60
- Garmin GPSMAP 60C
- Garmin GPSMAP 60CS
- Garmin GPSMAP 60CSx
- Garmin GPSMAP 60Cx
- Garmin Astro 220
NOTE: As
the manufacturer adds new units/models to the above series this cradle
may fit additional models not listed above. Please call 224-578-9162 or
complete the product inquiry form by clicking here.
RAP-B-104-224-GA12U shown above.
RAP-B-104-224-GA12U Includes the Following:
Warranty: Manufacturer's, RAM Mounts (National
Products Inc.), Limited Life Time Warranty.Mount End Plate Design: The
RAP-B-238 RAM Mount High Strength Plastic Composite Universal Plate has
a 1.0 inch diameter rubber ball connected at right angles to a 1 1/4 x
2 1/2 inch Diamond Plate. The plate has two holes positioned at either
tip of the diamond plate.
Mount Arm Design:
The RAP-B-200-1 RAM Mount Socket and Octagon Button Arm includes a 1
inch B sized ball socket and is made of high strength plastic. The arm
is 1.75 inches long when measured from socket center to button socket
end. The side of the arm includes a tightening knob which allows you to
open and close the socket ends.
Mount Base Design: The RAP-224-2 RAM Mount high strength plastic locking 3.25 inch diameter rubber suction cup base is designed to have an extra strong hold
on any smooth non-porous surface. With a twist on the locking knob, the
suction cup base adheres to any glass or non-porous plastic surface. Connected
to the top of the RAM suction cup is a male RAM plastic octagon button
with pivot connection. The pivot design allows the mount to tip from 0°
to 90° to the suction cup, while the octagon button connections allows
the arm to rotate 360°. The button end connects directly to a
RAP-B-200-1 plastic arm with socket and female button ends.
Cradle: RAM-HOL-GA12U high strength plastic cradle is designed to hold the Garmin device specified above. The cradle has a cut away at the bottom to allow the connection of all required cables (not included). The cradle also enables full access to all buttons and port.
Optional Cradles. To view other optional cradles for Apple, cell phone or GPS units click here.
